yacht deck paint colours

Boating Basics Online is reader-supported. When you buy via our links, we may earn a commission at no cost to you. Learn more

The Best Boat Deck Paints for Non-skid, Fiberglass & Wooden Deck

Written by J. Harvey / Fact checked by S. Numbers

No thanks to harsh elements like wind, rains, and extreme heat and cold, any boat is bound to show signs of wear and tear over time. Nowhere is this depreciation more obvious than in the paint coatings on our vessel, on the decks we regularly trudge. What’s good is that there’s always a remedy for a beaten up deck that’s becoming unsightly and deteriorating. There’s nothing that the best boat deck paint can’t polish up in no time. The icing on the cake is that these coats do more than beautify a boat. Some naturally impart non-skid perks that would make any Navy sailor green with envy. Others add years to your boat’s life by making it waterproof and dustproof. A few marine deck paints can even deliver all these things altogether, as proven by this review and buying guide.

• Decent traction
• Good self-leveling
• Outstanding protection

• Very easy to apply
• Decent drying time
• High-gloss and marine-grade

• Notably durable
• Excellent non-skid
• No undesirable odor

Table of Contents

1. Rust-Oleum 206999 Marine Topside Paint

2. totalboat wet edge marine topside paint, 3. totalboat totaltread non-skid deck paint, 4. kiwigrip kg10171r non-skid coating, 5. rust-oleum 207009 marine anti-slip additive, 6. durabak 18 textured non-slip coating, 7. kilz l394811 over armor smooth, 8. liquid rubber smooth polyurethane coating, 9. tuff coat ut-100 non-skid coating, 10. kilz over armor textured, 11. insl-x su031009a-01 sure step coating, 12. evercoat 853 skid-no-more rubberized coating, factors to consider when choosing boat deck paint, what is the best boat deck paint, how should i prepare my boat before painting, how do you paint a fiberglass boat deck, is anti-slip decking paint any good, best boat deck paint reviews.

• Excellent durability
• Strong smell
• Very easy to apply and manage
• Decent drying time and durability
• Doesn’t need a primer if a solid layer of paint is present
• Recommends xylene as thinner
• Limited availability
• Easy to use
• Smoother finish
• Proven durability
• Great traction
• Takes a while to dry
• A little expensive

• Comes with a roller for optimal application every time
• Relatively small amount of paint in every container

• Excellent slip resistance
• Easy to use with most paints
• Adds an extra layer of protection to boats
• Delivers great results even with minimal amounts
• A bit costly

• Delivers way more than what it promises
• Adaptable to most deck surfaces
• Ready to use and easy to apply
• Multiple attractive color options
• Very durable

• Budget-friendly
• Attractive finish
• Long-lasting coats
• Superior coverage
• Not that slip-resistant
• Needs to be thinned well

• Comes in many attractive colors
• Above-average durability
• Easy to prep and use
• Well worth the money
• Costs a lot per gallon

• Superb durability
• Great-looking finish
• Superb color options
• Easy to clean
• Non-hazardous to health and environment
• More expensive than most

• Excellent traction
• Satisfactory durability
• Feels smooth
• Performs well with one coat
• Quick-drying
• More costly than the Smooth version
• More difficult to apply than other paints

• Excellent coverage
• Amazing traction
• Lasts for a long time
• A bit expensive
• Strong odor

• Versatile on most surfaces
• Strong adhesion
• Great value for money
• Quite difficult to manage
• Unattractive colors

• Slip Resistance and Water Protection

The safest choice is always a paint that offers anti-slip because you need to be confident that you won’t slip or fall regardless of how much your deck gets wet. Not all anti-slip paints and additives are slip-resistant and vice versa. However, getting any of the two would always be a good step in the right direction. Waterproof paint not only tends to stay on longer but is easier to clean, too.

Paints that are UV resistant can resist most weather conditions and can handle the pressure of regular foot traffic and abrasions are what you should aim for if you want coats to last. Epoxy boat floor paint tends to be a safe option for this, but as my list above proves, you should also give other kinds of paint a try, even water-based ones.

• Color and Aesthetics

Your boat’s deck is often the one area of your vessel where you can flaunt your style. The colors you choose can either make or break that factor for you. If you want coatings that can hide the dirt and grime, then I suggest you choose darker ones. As much as possible, don’t let the color for boat decks depart too much from its overall theme.

Oftentimes, the paint products themselves would give you detailed instructions about how to prepare your boat to achieve optimal results. In most cases, I’ve discovered that it’s best to stick to these instructions. Otherwise, it’s always best to sand surfaces prior to application, especially if you’re doing a repaint and have to remove flaky stains and coats. It’s standard practice to make sure the surface is spick-and-span clean before you apply any paint product on it.

Besides a few unique steps you need to take, it’s not that much different from painting wood or metal surfaces actually. Make sure you keep the fiberglass clean and dry before applying any kind of paint. Let it dry in a place where it won’t be subject to further moisture or dirt. An important step you shouldn’t forget is to mask off the area you intend to paint. You can use a suitable painter’s tape for this to make sure the final finish won’t have irregular co. Paint for fiberglass boat decks usually requires a primer, but not always. Only use it if the specific paint product calls for it. With the area dried and masked off, you can now begin painting. After you’re done, you can now remove the tape and from there, it’s a waiting game till the coat you applied dries completely.

Yes, there’s no shortage of paints and additives that give the traction you want in your deck surfaces. However, not all of them last long and may need regular application over time. Some are so easy to apply that you won’t mind rolling a fresh layer should the previous coatings begin losing their grip. https://youtu.be/CFi3KRFSw_Y

The best boat deck paint can give you that much-needed Zen-like peace when out boating, fishing, or cruising. Why? Because you won’t have to worry about slips, falls, and a worn-out deck once you apply it. The products I’ve highlighted here can, more or less, help you attain that as long as you pinpoint the best ones for your purposes.

“I am James Harvey – founder of Boating Basics Online. It is established with the drive to help out first-time boaters, which are those desiring to explore their way through the water. So if you are new to boating, start from here with me. “

6 Best Boat Deck Paint – (Reviews & Buying Guide 2021)

Ah, imagine if the pirate ships a few centuries ago were able to paint their decks in various colors. Boating wouldn’t have been so gloomy, right? Luckily, today we can put whatever nuance we want on the floor of our boat, but to do so, we need to obtain the best boat deck paint available.

So here, we are giving you this extensive guide on how to purchase the right product but also how to carry out your deck painting project. Before you get to our tips, make sure you check out the reviews of boat deck paint that we have compiled because your project will be doomed without the most suitable paint for your needs.

Best Boat Deck Paint Comparison Chart

PRODUCT	DETAILS
	TotalBoat Non-Skid Deck Paint
	Rust-Oleum Anti-Slip Additive
	Liquid Rubber Deck Sealant
	Kiwi Grip Non-Skid Deck System
	Rubberseal Liquid Rubber Coating
	Interlux Slip Resistant Deck Paint

Best Boat Deck Paints (New List 2021)

So, check out the paints that we have selected, but don’t assume that No. 1 may automatically be the best one.

1. TotalBoat Non-Skid Deck Paint

The finish won’t get scratched or wear away if you scrub it. Apart from applying this product on your boat deck, you can use it for stairs, docks, swim platforms, floors, and everywhere else you need secure foothold.

One galloon will be enough to cover 250 to 300 square feet. Keep in mind that it is advisable to apply two coatings to make the traction more efficient. You can use either a brush or a roller to put this paint on wood, fiberglass, or painted surfaces.

The product comes in four colors, which are suitable for boat decks.

• An advantage of this product is that it withstands not only the weather conditions but also scrubbing and cleaning.
• Since this paint is less abrasive than sand impregnated coatings, it is easier to sweep off.
• This deck paint is easy to apply and adheres well if the surface has been adequately prepared beforehand.
• You can cover around 300 square feet with one galloon, which is more than what similar products offer.
• The time needed for the paint to fully solidify is pretty long. It may take from 2 to 3 weeks, depending on the air humidity.
• As it has an oil base and it is pretty thick, the paint cannot be applied by spray gun unless you thin it.

2. Rust-Oleum Anti-Slip Additive

To understand the effect of this anti-slip better, you can imagine that you add fine white sand to the latex or paint. The texture of this product resembles pumice, which is the reason it makes the surfaces covered with it non-skid. You can be assured that the anti-slip features of this material will be active as long as the coating exists.

If you intend to apply the mixture of paint and this additive on waxed materials, you have to remove the wax first. Make sure that you have prepared the surface well, and it is clean and dry.

• Being mixed with paint or latex, this additive is easy to apply.
• This substance has proved to be durable – its anti-slip effect lasts as long as the coating does.
• The Rust-Oleum additive doesn’t change the color of the paint.
• You can put this product on floors to make sure that they are not slippery because it makes the surface it covers anti-skid
• If you add this additive to top coating, its grains may capture grime, which will make your deck look dirty.
• The surface covered with the mixture of paint and this anti-slip appears to be rough on bare feet.

3. Liquid Rubber Deck Sealant

There is no need to mix the paint with any other substances, and you can apply it by roller, sprayer, or brush. Thanks to its liquid rubber polyurethane formula, this coating makes the surface it covers resistant to water and UV rays.

The area that one gallon can cover is approximately 100 square feet. The manufacturers recommend applying from 2 to 4 coats, especially if the surface is waterproof. Keep in mind that due to the time required for the paint to dry, you cannot apply more than two coats per day.

Depending on how the coating is treated and on the weather conditions, its life expectancy can be from 5 to 10 years.  Before applying the sealant, make sure that the surface is clean and dry.

• This product comes in a variety of colors.
• You will be surprised how easy it is to apply this sealant.
• Thanks to the liquid rubber it is made of, this coating bonds very well to the surface.
• Unlike similar products, this one dries quickly.
• You are not advised to apply this paint if the weather is too hot.

4. Kiwi Grip Non-Skid Deck System

The second reason is that it is very convenient to apply this coating using the KiwiGrip roller. Not only will you cover the surface with this tool with only one coat, but there won’t be any need for additional fillers. What is more, there won’t be any traces of shells, rubber particles, or sand on the covered surface.

The third reason which makes this product worthy is the fact that it is eco-friendly because it is water-based. This coating comes in 5 colors you can choose from.

• The product comes with a KiwiGrip 4-inch roller.
• You can save money using this material, as you will need only one coat of it.
• Its water base makes the Kiwi Grip eco-friendly.
• This substance makes the surface it covers anti-skid.
• As the KiwiGrip is not a sealed paint, you will have to prime any aluminum surface before you put the coating.
• If you want to have the non-skid effect that this product offers, you have to apply it only using the KiwiGri roller, which is a limitation as some people may prefer brushes or sprayers.

5. Rubberseal Liquid Rubber Coating

here are four colors you can choose from. If you need another color which is not offered, you can use elastomeric paint. Keep in mind that it is advisable to apply two coats of the rubber seal. Make sure that the surface is clean of dirt or residue and dry before you put the coating.

An advantage of this product is that it features elongation, which means that it will expand and contract with the expansion and contraction of the material it covers. Even though this coating has a slight odor, it is not unbearable. Since this rubber seal is water-based, it won’t bond to wood or any oil-based surfaces.

• This product has an EPA star rate, and it is resistant to UV exposure.
• You can easily apply the coating by roller, brush, or sprayer.
• Being pretty thick, this material adheres well to the surface and protects it from water.
• The manufacturer offers four colors of this coating.
• It takes around five days for the coat to be ready, and you need to make sure the weather is hot during this period.

6. Interlux Slip Resistant Deck Paint

Bear in mind that it is recommended to apply two coats of the paint for better results. Interlux is one of the manufacturers who offer very handy to use non-skid paints. The easiest way to do it is by roller. A disadvantage of this product is that the lighter colors get dirty quickly, and the dirt is hard to come out. This effect is caused by the small grains that the paint consists of, which gather grime.

• This Interlux paint is easy to apply and provides a good grip.
• You can walk safely on a floor covered with this material as it is non-slippery, but at the same time, it is not rough on your bare feet.
• Interlux offers four colors you can choose from.
• The paint doesn’t reflect the sunlight glare.
• The white paint gets dirty quickly because of the little grains that gather the dirt.

Importance of Having a Non-Skid Boat Deck

So how do we achieve that effect, and can it be a DIY project? It absolutely can be, and there are two main ways to have a non-skid deck.

• Use a can of designated non-skid paint
• Mix a non-skid additive with your color.

The latter will require you to purchase two materials while the former will allow you to deal with the whole project just by using a can of paint. Both options are worth exploring because we simply have to be aware of all the benefits of non-skid deck applications .

When we talk about the boat deck, the surface you are painting will likely be wood or fiberglass. Some people also go for rubber boat flooring.

The hull of the boat may be made of aluminum but definitely not the deck. Still, the body will also require painting, so you might as well jump to our reviews of the top paints for aluminum boats and see if you like our picks.

How to Paint my Fiberglass Boat Deck?

• Select the right paint

This is why we have compiled the reviews and the top list above. We suggest you pick one of the selections and go with it. If you go with a topcoat paint, you will also need to get an additive. The two-part polyurethane products eliminate the need to do so.

We will follow the steps of painting a deck using either of the options. Only towards the end, the stages differ from one another. There is also a third option which we will not outline – purchasing a paint which has been pre-mixed with some powders. We don’t have such a product on our list because we don’t think the quality is exceptional.

• Preparation

This is an essential part of your project. Ys, many people suggest that the actual application of the paint matters because inexperienced people can make it look ugly. While this is correct, experienced pros will also achieve poor results if they work on a poorly prepared surfaced.

Do you know what Marcus Aurelius said? The secret to all victory lies in the organization of the non-obvious. This is why we will devote a little bit more time to this stage of the project and will list some of the things you have to pay attention to.

• Start by deciding where you will conduct the whole paint job. We don’t suggest you do it outside. It is best if the boat can be indoors and even out of the water. Some vessels can have the panels of the deck removed. This will allow you to paint piece by piece and then have them installed back. In any way, find a shelter that is large enough and has sufficient amounts of airflow.
• Don’t paint early in the morning or late in the evening. We recommend you do that before noon because this is the optimal time for any paint to cure. During the evening, the moisture levels will rise and will slow down the process of drying.
• We at The Marine Mag know how to take care of a boat. Check out our boat detailing page for more info. Until then, remember that if you prepare things correctly, you will have less work after you finish painting. Masking is an integral part of the procedure, and you must be very careful with it. Make sure you do not leave any air under the tape and also be careful to create straight lines. We suggest not to don’t rush it.
• Become familiar with the instructions. Diluting your paint or not using the correct amount can result in disastrous outcomes. Don’t underestimate the information on the can. After all, the manufacturer will know best exactly how to mix the paint. They’ve conducted the tests for you.

We got a couple of tips related to sanding as well. This is also a crucial stage because if not done correctly, you will notice that the paint may look different in some areas. The good thing is that once you paint using a non-skid paint, you won’t need to sand for any subsequent paint project on that surface.

But if that’s the first time you are painting the deck, then roll back your sleeves and get to work. We recommend using an automatic sander. The ones that rotate in random directions are the best. No need to push hard – let the machine do the work.  You can also use a palm sander, but such an item will be good for the edges or some hard-to-reach spots.

This is another tool on which you don’t want to go cheap. Use it generously because once the sander wears off, it’s really no good. Applying a new brand-new sander is always very useful, so once you feel like the paper is thinning, change it.

• Clean before you paint

After all the sanding and masking, you will surely see plenty of dust on the deck. Never neglect cleaning the area before you whip out the can of paint. Make sure you sweep or vacuum every little piece of dust because the filthy surface is impossible to paint, and your project will be a grandiose failure.

This is where we suggest you check out our pro reviews of the top boat cleaning brushes . You cannot own a boat without having a brush around. See the most popular products and pick one.

Applying the Paint on the Deck

And now we get to the meat of things. This is where the situation changes a little bit because you may have opted for a paint that has its own non-skid properties. Your other options are the classic one, where you will have to mix the paint with an additive. So let’s begin with that choice and outline the process of using a powder.

Using a non-skid additive with your boat deck paint

The exciting thing here is that this subsection is divided into even more possible choices and steps. They are all related to how you want to have the paint, and the additive mixed. You got three main choices.

• Paint the surface using your regular coat and then use a strainer to distribute the powder on the surface. You will have to wait for the paint to cure a little bit and then blow the powder that hasn’t stuck away. Then, apply the second coat and seal the powder between the two layers of paint.
• Your second option is to simply use your hand and spread the additive over the paint. This is similar to what you do when you season your food. You just have to be careful to distribute the material evenly.
• The trickiest option is to mix the additive and the paint before application. This will yield the best results, but it can also turn into a catastrophe. You must be sure you are aware of the proportions because otherwise you risk using too much or too little powder. In the first case, applying the mixture will be a nightmare as your roller or brush will likely get clogged with the additive. In the second case, you will barely achieve any non-skid effect.

Using a two-part paint where extra material is not required

Some paints (even on our list) do not require the use of powder to create non-skid substance. This is quite the advantage, and the whole project may turn out to be a simpler one.

• Use a brush and start applying the paint at a shallow angle. Put down as thick of a layer of paint as possible.
• This paint should come with a unique roller with an advanced grip. This is not your typical foam roller but a curly one, which is used only to create the texture. It is essential to remember that part. You don’t use the roller to distribute pain but only to texturize it. Go over the surface a few times and in different directions so that you can achieve a uniformed pattern.
• Wait for it to cure and remove the tape. You’re done!

This is where we will say “goodbye” only to hope to see you again in one of our other guides. The Marine Mag team is sure to have helped you in your search for the best boat deck paint . If you have any doubts regarding a specific product, by all means, read or reviews of boat deck paint once more.

Tell your friends and family about us and leave us a comment. Your feedback is much appreciated, and it makes us always move in the right direction. Thanks for reading!

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

Ridetheducksofseattle is reader-supported. When you buy through our links, we may earn an affiliate commission. Learn more

The Best Boat Deck Paints (Non-skid, Fiberglass, Wood & More)

Written by Anthony Roberts / Fact checked by Jonathan Larson

Unlike indoor areas, the boat deck is exposed to various elements such as rain, sun, and wind. The wear and tear of frequent sailing is another thing to worry about. So, it’s a good measure to settle for the best boat deck paint. To get it, you have to be certain of the following factors:

• Protection: A stunning finish is a normal thing to expect from boat floor paint. But it’s also crucial that it guarantees the safety of those who step on the boat’s floor. It needs to have water and slip resistance like epoxy boat floor paint. When the paint is not easily washed away, peeled, or cracked, it protects decks and surfaces well.
• To establish a slip-resistant surface, paint texture and formula are the components. Non-slip deck paint can also be applied to accessories like deck chairs where you can sit comfortably.
• Color: Color plays a big role in promoting a lovely finish that suits your deck. It won’t be hard to pick the one that you like since there’s a wide range of available colors. Just so you know, the white color will allow you to be barefooted since it remains cool even under the sun. When you choose dark-colored deck paint, it’s advisable to wear your shoes even onboard.
• Durability: The paint for the boat floor must be tough enough to bear foot traffic, UV rays, and rough weather conditions. For example, the best non-skid boat deck paint creates a durable finish that doesn’t cease to protect.

Now that you are aware of the factors that you have to take note of, look through these boat deck paint reviews to choose one that suits you.

TotalBoat Deck Paint

+ Creates a durable, textured finish

+ No peeling and fading

+ The tiny particles are not sharp

Jump to Review

Rust-Oleum 206999

+ Used in different painting jobs

+ Smooth finish

+ Creates a protective layer

KiwiGrip Non-Skid Coating

+ Can make your preferred texture

+ Prevent slipping

+ Covers scars and dings

Table of Contents

1. TotalBoat TotalTread Non-Skid Deck Paint

2. rust-oleum 206999 marine topside paint, 3. kiwigrip non-skid coating, 4. totalboat 365399 wet edge marine topside paint, 5. liquid rubber smooth polyurethane deck coating, 6. rust-oleum 207009 marine anti-slip additive, 7. tuff coat ut-211 light gray non-skid coating, buyer’s guide, what kind of paint should i use on my boat deck, how should i prepare my boat deck before painting, how do i paint a fiberglass boat deck, how do i paint a wooden boat deck, top 7 boat deck paint reviews.

The tiny plastic beads make this stand out among anti-slip paints. They are way better than sand mixed and are so small you can’t easily spot them. Once the paint dries, you’ll be happy with a durable, textured surface. This is not only paint for fiberglass boat decks  as it can adhere to wood, metal, aluminum, and previously painted surfaces, too.

The silica in this formula makes the finish easy on bare feet. I like how the surface isn’t slick after a water splash or rain. As mentioned, it’s durable so peeling and fading won’t occur. Although scrubbing is done for maintenance, I and my crew can still have a secure footing without compromising comfort.

I’m more than satisfied with its effect on the deck and cockpit of my boats. Hence, I used it in replacing the old Spalding basketball backboard that has been rotting for years. It made my son who’s crazy about basketball so happy! It’s been a year since I did this project, and this proves that it can protect the wood from warping.

Every purchase of this non-skid deck paint comes with gloves and a stir stick. Before application, it needs to be mixed properly. To ensure that I do it efficiently, I use a drill mixer. I must say that two coats are essential as the first one may show inconsistent layers, especially where the particles are only contained in a certain area. It’s fixed by the second coating.

• Creates a durable, textured finish
• Not slick even splashed with water
• No peeling and fading
• The tiny particles are not sharp
• Protects wood from warping
• Can revive and maintain a fiberglass
• Needs to be mixed well to achieve the desired result
• Two coatings are a must

I’ve heard from the boaters in my area that they use it for their boat hulls. The description recommends it for above the waterline use, so I ventured to have it on my deck. To my delight, it serves well as a boat floor coating. I was amazed when I saw it cover cracks and scratches. I love the smooth finish with a display of elegance too. On top of these benefits, it’s boat deck paint on a budget.

The gloss is just right because I think it can be slippery if it’s too glossy. It’s just my opinion on its finish that is akin to hard plastic. Apart from fixing and enhancing fiberglass, wood, and metal surfaces, it builds a protective layer against UV rays and bad weather conditions.

My boats and marine accessories are not the only ones that benefit from this quality deck paint. My once butterscotch-colored bathtub turned into its original white color after I applied it. It bonds well with the fake granite countertop in my kitchen. Therefore, it’s dependable for every painting job.

• Can cover cracks and scratches on fiberglass
• Smooth finish with enough gloss to not make surfaces slippery
• Creates a protective layer against UV rays and bad weather conditions
• Can be applied on fiberglass, wood, and metal surfaces
• Used in different painting jobs
• Levels well and can be sprayed or applied manually
• Needs to be thinned out to dry quickly
• Has a strong scent

Restoration of my 15-foot bass boat is a success because of this non-skid paint. I made the right decision of replacing the carpet on my deck with anti-slip decking paint. Aside from the bass boats and aluminum boats, this can bond on fiberglass surfaces. You may apply it on a wooden deck but you have to prime the area first. Also, it can stick on concrete.

I can say that this is the best paint for the boat deck because I can control the texture. I prefer just a little texture so it won’t be bothersome to my feet. Enough traction is what I need to prevent slipping and other accidents on wet decks. You can practice on a scrap piece to get the texture that you like.

There are black and pastel boat deck paint colors to choose from you. The light colors are selected so the non-skid properties are not destroyed. I’m even more impressed when I found out that it can cover scars and dings. Thus, I didn’t think twice about using it on my 30-year old boat that was not in use for many years. You don’t have to hesitate to include this in your kit to restore water vessels.

• Can be on metal, aluminum, fiberglass, and wood surfaces
• You can make your preferred texture
• Prevent slipping even though the deck is wet
• Covers scars and dings
• Good for water vessel restoration
• The need to move fast working under hot weather to be able to level the finish

The deck area is where people usually walk going back and forth. Due to this, I can be at ease with the durable and glossy finish of this product. It creates a beautiful layer that is resistant to scratches, abrasion, and chemicals. I can attest that this paint can last for many years and repainting doesn’t need to be done frequently. Most importantly, the durability gives me peace of mind.

The thick finish can let the old boats regain a new look. I even used it to correct the recent paint job done by the previous owner of the boat that I bought. After the vessel is painted, it stands out when it sits beside other boats.

Aside from being the paint for fiberglass boat floor, it’s applicable for metals, wood, and previously painted surfaces. So, you can have it as a pontoon deck paint. Several people use it to maintain their swimming pools in presentable condition. The manufacturer is right when introducing this as submersible because the paint stays the same even when it gets wet.

• Creates a durable and glossy finish
• Resistant to scratches, abrasion, and chemicals
• The thick finish is useful on old boats and fixing painted surfaces
• Can be on different surfaces
• Not easily tainted when it gets wet
• Can dry quickly
• It can sag or run when not applied thinly

I was desperately looking for marine paint for wood decks because of the substandard materials added by the builder to my deck. Since I don’t have a budget to replace the wooden parts, I opted for something like a composite deck. This is the right paint for my plans and I chose the texture light gray. There are various colors and you can also choose a smooth finish. It all depends on your preference.

It protects the deck very well despite the exposure to torrential downpours and tropical sun for a long period. That’s how dependable its thick layer is. It’s not the regular deck paints that flake off in a few years. I must say that its result can please boat owners. It can also be used on the dock kit that I assembled.

You may also apply it on concrete surfaces based on its efficacy on a couple of projects. To give a few examples, our balcony that looked gray and worn off is now wonderful. I tried so hard to stop the leaking in the stone garage when it rains. The issue was resolved after I used it on the cement deck over the garage. It’s a clear testimony that it covers surfaces completely.

• Various colors and types of finish
• Protective against torrential downpours and tropical sun
• Doesn’t flake off easily
• For wooden and concrete surfaces
• Can stop leaking
• Not slippery or too hot to step on even though it’s exposed to the sun
• More time for application

Safety concerns oblige me to get excellent deck paint for the aluminum boat. This product is the right candidate since it’s slip-resistant deck paint. But it can be on different boat decks as it can stick to other materials. Aside from being skiff or pontoon boat deck paint, it’s applicable for fiberglass, wood, and painted surfaces. As an additive, you can mix it with oil-based or latex paint.

You can expect longevity from its finish as it has survived high traffic. The anti-slip result is perfect for the boat’s deck and floor. No more fear of backflipping during damp mornings. This also assures my elderly mother that she can get on my pontoon without tripping. I also use it on her ramp. Our front door at home is no longer slippery after I mixed some of this with the cement paint.

As you can observe with the various applications, it’s indeed for interior and exterior use. When water and snow stay on the finish, I just sweep them off. It gives me relief to see that nothing bad happened. I thought that I needed to repaint the deck but fortunately, it’s not necessary when you have this waterproof paint.

• Survives high traffic
• Non-slip, waterproof coating to prevent accidents
• For interior and exterior use
• Not easily damaged by snow and rain
• Can be applied directly without mixing with oil-base or latex paint
• Application in small batches can be time consuming

It’s unquestionably marine-grade paint because of the finish that it makes. It has a non-skid additive in the form of recycled rubber tire granules. So, you can ditch the carpet that you use on your deck and spare yourself from the demands of cleaning. It’s an outstanding paint as I can make a durable coating that is slip resistant at the same time.

You may think that this is a boring kind of paint because of its inclination to durability. But it’s available in 15 shades so you can choose the one that spices up your boat’s look. When there are blemishes, scars, and stains on fiberglass surfaces, you can use it to cover those areas. Thus, it doesn’t only prevent surfaces from being slick and slippery but it enhances the appearance as well.

Apart from fiberglass boat decks, it has remarkable effects on aluminum boats. My fellow boater also painted this on the floor of an enclosed trailer. The effect is superb just like how it goes with the exterior surfaces. Furthermore, I’m surprised that it’s also great on wooden decks so it’s like sailboat deck paint too! With these revelations, the durable coating of this paint is versatile.

• Delivers a durable, non-slip coating
• Can hide blemishes, scars, and stains on fiberglass surfaces
• Has remarkable effects on various materials whether interior or exterior part
• Has resistance to impact
• Doesn’t have a strong odor
• Dries in just half an hour
• Application is time-consuming

Types of Boat Deck Paint

The market offers a wide range of marine deck paints. In terms of ingredients, the usual ones are oil-based paint, acrylics, and linear polyurethane. Some of these paints have ground rubber or tiny particles to create a non-skid finish.

Among the formulations, polyurethane paint proves to be great at resisting UV rays, water, solvents, and oils. High-quality paint protects the deck against harsh elements so your deck and boat won’t be easily damaged.

• These paints can fill up gaps and cracks. They can cover the effects of outdoor elements. Moreover, you may use it to fix the damaged and faded areas on different surfaces.
• Deck paints are available in various colors so you can choose one for aesthetic enhancement. Faded and aged colors can be replaced with ease.
• These paints protect wooden surfaces very well. They can repel UV damage, rotting, and molds. Thus, your wooden deck is in good shape as long as you cover it with reliable deck paint.
• Most boat owners would spread a carpet on the boat’s floor. However, you have to clean it from time to time. If you paint your deck with a good product, you can make a tough finish that requires effortless cleaning.

The kind of paint that you should use on your boat deck is the one formulated to protect against daily wear and tear. Furthermore, it must shield the deck and floor from foot traffic, harsh sunlight, water, and wind. It typically can eliminate flex damage and cracks caused by freezing. You can also find one that stops leaking issues.

If you’re worried about slipping issues because the deck is exposed to water and rain, choose paint that has slip resistance and is comfortable to bare feet.

Here are some necessary preparations so you can continuously paint your deck without interruptions.

• Remove all the hardware like plastic, aluminum window frames, and sliding doors. It must be done before starting to paint. For instance, the paint can mess up objects made of plastic.
• Just a brush of the paint can sometimes be wrong as you need to complete necessary repairs like rotting sections and damaged areas. It’s a crucial step to achieve the expected result.
• The temperature affects the outcome and drying time so you have to be conscious when you begin the painting process. Too much heat at noon is not good as well as late afternoon because cooling temperature and moisture in the air have unfavorable effects. A sunny day is an ideal time to paint.
• When you need to sand and vacuum the service, get rid of the dust and residue. You can make sure that there is no residue by smacking the surface with a towel. Then, sweep and vacuum if it’s still needed before you wipe the area with a clean cloth.
• Read the manufacturer’s instructions so your work won’t be interrupted. You may stop at one point and wonder about the next thing that you need to do. To avoid this, familiarize yourself with the necessary steps. It’s also a way to achieve the expected result.
• You may use a primer or not since it’s not a must for fiberglass boats. If you opt for a primer, you need to make sure it’s compatible with your chosen paint.
• When the layer of primer is done, you can lightly sand it before proceeding to the second coating. It’s advisable to begin painting two hours after the completion of the primer.
• Mix the paint as instructed by the manufacturer.
• Start painting on the edges as you go and you can work your way to the middle. You’ll also need to put tape on the edges of the area you intend to paint.
• Although it appears that the paint has dried, it’s best to let it sit for 24 hours or the time recommended by the manufacturer. Protect the surface from debris and bugs from sticking.
• Sanding the wooden surface is crucial to ensure that the paint adheres well and the result is great. You may use a disc sander or orbital sander. Sandpaper is also needed in some cases. The coarseness will depend on the wood condition. Pick the coarser one if there are a lot of undesirable spots to scrape.
• After sanding, you have to clean the area and get rid of the tiniest particles. You can use a vacuum to get rid of the dust.
• It’s recommended to use a primer for bare wood. A single coating is fine but the second coating is pretty good. Choose the metallic primer because it’s watertight.
• When applying the paint, you should follow the direction of the wood’s grain. Scratches that are caused by sanding won’t be obvious if you do it. Avoid over-applying and just put the right amount of paint in the brush or roller. It’s best to apply thinly.
• Drying is quick during warm days. While drying, make sure that nothing sticks on the surface.

Decks can be made of various materials. A single deck may have various components but with the best boat deck paint, you won’t need any other substance as it can adhere to different materials. The right paint protects your deck against sunlight, rain, snow, wind, water, and other harsh elements in the long run. It also prevents accidents that can occur from slippery boat floors.

Ten years of enjoying countless trips on boats never made me love them any less! So I am here to put all those experiences into good use for other boaters who want to have a safe and fun trip with their friends and families.

Please verify you are a human

Access to this page has been denied because we believe you are using automation tools to browse the website.

This may happen as a result of the following:

• Javascript is disabled or blocked by an extension (ad blockers for example)
• Your browser does not support cookies

Please make sure that Javascript and cookies are enabled on your browser and that you are not blocking them from loading.

Reference ID: 8daea174-61f0-11ef-91d1-e0e162babf98

Powered by PerimeterX , Inc.

• International Marine Coatings
• International Protective Coatings

Paint your boat like a pro

The best advice. The latest products. All at your fingertips.

Make it a job well done

Helpful advice that guides you through all kinds of jobs

Find the right products

Quickly find products you need for any boat or yacht paint job

Expert Advice

• How do you paint non-skid decks?
• Can I apply antifouling in the fall?
• Applying finishes
• What is Biolux®?
• View all advice

Problem solver

• Hull Blisters
• Gritty Paint
• Blistering or Bubbling
• Rust Corrosion
• View all problems

Popular products

• Micron Extra SPC
• View all products

Latest from Interlux

A Revolution in Topside Paint: Our new one-part topside system, Pre-Kote Plus and Toplac Plus

Your 2024 Boat Paint Guide is now available online

2024 Spring Mail-In Rebate Program

Find the best products to keep your boat in great condition

Get all the support you need to paint with confidence

Benefit from our continuous innovation and scientific expertise

Select your country

Our products and guidelines are customised for each country. Please select yours below.

• Canada Canada
• United States United States

Asia Pacific

• Australia Australia
• New Zealand New Zealand
• Singapore Singapore

• België Belgium
• Hrvatska Croatia
• Danmark Denmark
• Suomi Finland
• France France
• Deutschland Germany
• Ελλάδα Greece
• Ireland Ireland
• Italia Italy
• Nederland Netherlands
• Norge Norway
• Portugal Portugal
• España Spain
• Sverige Sweden
• United Kingdom United Kingdom

Middle East & Africa

• South Africa South Africa
• Türkiye Turkey

Who's painting?

Choose one of the following to tailor the site to your needs.

Better Sailing

Best Non Skid Boat Deck Paints

Painting your boat’s deck can be a challenging task. In this article, we will take a look at the Best Non-Skid Deck Paint for your boat or sailboat. For this article, I asked some boaters friends of mine, marine product professionals, and some online forum buddies of mine and well as my personal experiences with some of the following products.

A good non-skid boat deck paint provides a slip-resistant surface on your boat that is essential when you try to move on your deck even at the best of conditions. In foul weather, a non-skid coat of paint could be the difference between life and death. These anti-slip paints will increase friction and reduce the likelihood of a fall overboard.

Kiwi Grip Non-Skid Deck Paint – Overall The Best Non-Skid Boat Deck Paint

If you’re DIYing it. Go with Kiwi Grip . It’s overall the best non-skid deck paint for your boat, and as long as you plan well, you can do a whole boat, including the cockpit, in about three sessions. But be warned, it’s expensive stuff. It costs around 150$ per gallon (4 Liters), and each gallon can of KiwiGrip can cover about 80 square feet.

I like the Kiwi Grip because it’s water-based, so easy to clean up and deal with. For the non-skid effect, you just use a special roller, no sand or crushed shell or whatever people add for the non-skid effect, which makes for an easy application. It probably the easiest material to work with to give your boat the desired non-skid effect.

It is a good idea to experiment on a piece of plywood before tackling your deck. Kiwi Grip is easy to mess up like just about anything! Practice makes almost perfect! But do not worry, even a bad Kiwi Grip job still works great; making it look pretty is about finesse and practice. A Blue Paper Masking Tape will be your best friend in this application, so you can make the edges perfect.

I had very good results with Kiwi Grip; follow directions carefully, don’t let it freeze, and practice, for the best possible results, apply the paint on a dry and hot day. Remember, you can always go over any part that isn’t perfect again. And last but not least, do not forget to wear a mask.

• Easy To Apply
• Great Non-Skid Effect
• Doesn’t look as good as some other options if not done carefully

TUFF Coat Non-Skid Coating

This type of paint is becoming very popular lately, and for a good reason, TUFF Coat is easy on your feet, highly durable, and has the added benefit of looking good as well. A friend of mine has used it for about 10 years now on his catamaran sailboat. He recoated once, 4 years ago, and is very happy with it. The two-part primer they have for it is very runny, so be careful with it. It sticks to itself great, though. It stretches a bit, which can hide minor Gelcoat cracking, and is very soft on the knees and bare feet because of the rubber particles.

For proper application, use a drill mixer to thoroughly stir and suspend all the rubber non-skid particles into the paint. Then, pour the coating into a paint tray and load your roller with enough paint. For maximum non-skid effect, you can use a paint roll similar to the one that is used for the Kiwi Grip application. That way, you will get the benefits of both the texture and the non-skid particles.

You will need around 1 Gallon of this stuff to cover 150 square feet of deck surface; per coat, 2 necessary, 3 recommended.

• Easy to apply
• Many colors

TotalBoat TotalTread Non-Skid Deck Paint

This is another single part nonskid paint for your deck, so you do not need to mix anything yourself. Just remember to stir very thoroughly before applying to ensure the solvents and non-skid particles are mixed in evenly, preferably with a paint mixer . This paint gives a flat finish with a non-slip texture, so if you do not like the texture that Kiwi Grip has, this is probably the way to go. It comes in 3 colors white, gray, and sand beige. To get a good result, you will need about two coats of paint, but if you decide that the desired effect is not there yet, you can add an extra coat for a more slip-resistant surface.

Before applying, make sure you clean the fiberglass properly with plenty of water and soap (let it dry) or prime first with TotalBoat Topside Primer. You can use both a brush or roller, but I would recommend rollers to get a more even result. 

This product is very user friendly since the application is as straight forward as painting a wall at your home. As a pro tip, it is better to apply multiple thinner coats of paint instead of one or two thicker ones. Also, give the paint one or two days to dry before you apply another coat, depending on temperature and humidity.

Keep in mind that you will need around 1 Gallon of this stuff to cover 250 square feet of deck surface.

• Not very durable
• Doesn’t dry easily in humid and colder climates

Interlux Interdeck Slip Resistant Deck Paint

This is a one-part polyurethane paint with the non-skid particles already mixed in; just remember to shake the solution well before applying to make sure all the solvents and non-skid particles are mixed in evenly. Also, while you are applying the paint, keep stirring it often because the non-skid will settle down to the bottom of the container. Interdeck has a nice matt finish to reduce sun glare. It may be applied over any type of paint, but you should not apply it over clear epoxy. Clear epoxies must be primed with Epoxy Primekote 404/414 before applying. Make sure to go through and follow directions carefully to make sure you properly prepare and apply the paint. Also, make sure to put tape over the areas you do not want to apply the non-skid paint to get the best looking deck.

Awlgrip TopCoat With Griptex Non-Skid Additive

This what the professionals recommend when it comes to non-skid deck paints. However, you will have to use Awlgrip TopCoat and also use their Griptex additive. You mix the two products together, preferably with an Electric Paint Mixer , and then the solution can be rolled on.

My boat had previously painted with Awlgrip TopCoat With Griptex Non-Skid Additive. The boatyard this winter sanded it, primed, applied two coats of paint with rollers, then they sprinkled the Griptex with a salt shaker-type when the paint was still wet, vacuumed the loose Griptex particles off, and then rolled on two more Awlgrip TopCoat coats on. I found it smart and intuitive instead of mixing more material than you need and wasting it. Awlgrip with Griptex additive will look the best, but its grip is inferior to Kiwi Grip.

AwlGrip White Base With Crusted Walnut Shells

I have to say this is a very controversial way to apply a non-skid coat on your boat. However, a friend of mine has done it, and I have been on this boat, and I must say that the result is great. It feels good on your feet, it has the desirable non-skid effect and is also pretty affordable. 

You apply it the same way you would apply the Griptex Non-Skid Additive to your AwlGrip TopCoat. The best way to apply it is to coat a thick layer of AwlGrip on your deck and then sprinkle the Crusted Walnut Shells on the wet paint; make sure to sprinkle the shells evenly. Let it rest overnight, and then vacuum the loose Crusted Walnut Shells off. Then, apply two more coats of Awlgrip TopCoat.

>>Also Read: Best Boat Coatings

Tips For Appling Any Non-Skid Paint On Your Boat

There are two types of people when it comes to preparing your deck for paint application. Many people sand their whole deck, and then they vacuum and clean it. The other ones just use a good deck cleaner and plenty of water to thoroughly degrease and clean the deck. That second way is ok if it is the first time you are applying a non-skid paint on your deck. However, you must remove all chips and peels from the deck’s surface. If you are reapplying, I would recommend removing the old coat first or at least sanding the old coat off as much as possible.

Pick a day that is not overly hot and sunny nor cold and cloudy. You do not want your paint to dry up too quickly nor to stay wet for two days straight. However, make sure to leave the paint cure at least for hours before you apply another coat. 

Use a paint mixer drill attachment to stir the paint before each application, especially on two-part non-skid paints. I would recommend this on pretty much all the paints featured in this article, but you can get away without using one on the Kiwi Grip because there are no non-skid particles suspended on that type of paint. 

Lastly, you will need a paint set that includes paint rollers, paintbrushes, and a paint tray. Also, get a Blue Paper Masking Tape to help you protect the non-skid areas and help achieve the best possible look.

Final Thoughts

The Best Non-Skid Boat Deck Paints is the Kiwi Grip, hands down; it is easy to apply and will get you the best result.  To spruce up your boat’s deck with great functionality, you need to apply a new coat of non-skid paint. You’ll be able to change the color (Kiwi Grip comes in Black, Blue, Cream, Grand, and White) and dress it up while also adding a layer of protection to your deck’s surface. Old, dull fiberglass surfaces like your deck can become fresh and clean in very little time and effort. The Best Non-Skid Boat Deck Paint will also protect fiberglass surfaces from liquids, repel stains, and provide a nonslip surface for safe walking. Also, if your fiberglass has developed chips and spider cracks over the years, a coat of paint will cover them right up and your boat will appear as good as new.

Also, if you are not sure you want to paint your deck them you could consider a Non-Skid Self-Adhesive Foam Teak Marine carper for your boat.

Peter is the editor of Better Sailing. He has sailed for countless hours and has maintained his own boats and sailboats for years. After years of trial and error, he decided to start this website to share the knowledge.

Related Posts

The Ultimate Guide to Choosing the Best Fishing Line for Trolling

Lagoon Catamaran Review: Are Lagoon Catamarans Good?

Best Inboard Boat Engine Brands

Are O’Day Sailboats Good? A Closer Look at a Classic Brand

• Buyer's Guide
• Destinations
• Maintenance
• Sailing Info

Hit enter to search or ESC to close.

Free Shipping On All Orders!

• Epoxy Resins
• Polyester Resin
• Urethane Resins
• Epoxy Project Supplies
• Antifouling Paints
• Topside Paints
• Thinners & Solvents
• Paint Supplies
• Wood Oils & Finishes
• Wood Finishing Supplies
• Cleaning & Polishing
• Accessories

Table Top Epoxy

Clear High Performance Epoxy Kits

5:1 Traditional Epoxy Resin Kits

• Thinners & Solvents

Wet Edge Topside Paint

Premium Marine Topside Primer

Spartan Multi-Season Antifouling Paint

• Wood Finishes
• Wood Oils & Finishes

Gleam Marine Spar Varnish

Lust Rapid Recoat Marine Spar Varnish

Halcyon Water-Based Marine Varnish

TotalBuff Rubbing Compound

TotalShine Finishing Compound

White Knight Fiberglass Stain Remover

• TotalBoat Gear

FlexFit Fitted Mesh Back Baseball Cap

Men’s Long Sleeve T-Shirt Hoodie

Women’s Long Sleeve T-Shirt Hoodie

FREE SHIPPING with a minimum puchase of $1,200.00 You are $10.00 away from your free shipping!

Shipping, taxes, and dicount codes calculated at checkout.

FOUR POPULAR COLORS

UV STABLE, LOW GLARE

LONG LASTING, LESS GRITTY

EASY TO APPLY

TotalTread Non-Skid Marine Deck Paint

Couldn't load pickup availability

• Description
• Frequently Bought Together
• Product In Action
• Specifications
• You May Also Like

Less gritty 'grit' has greater grip and longevity

Particle size matters. The round Propyltex™ particles in TotalTread are less abrasive than traditional silica, but more abrasion resistant. They come in a range of sizes, each with a different purpose. Some make sure the coating grips and lasts. Others lower the gloss level to prevent eye-straining sun glare on a wet deck. Some create a smooth feel underfoot. It doesn’t hurt to walk barefoot on it, and if you do hit the deck it won’t hurt nearly as much as old fashioned ‘sand’ non-skid additives do.

Masking is the hardest part of applying TotalTread

The non-skid stuff in TotalTread has a low density so it stays suspended in the paint. Unlike other slip-resistant deck paints, the particles won’t float to the top, or sink to the bottom. Mixing is easy and quick, and doesn’t require a trip to the local paint store to have them give it a ride on the shaker for you. Because the particles stay suspended in the paint, it’s easy to lay down an even coat of consistent texture. You don’t have to keep stirring the paint to keep the particles in play. The most time-consuming painting task is masking off areas where you don’t want TotalTread.

More coats equals more grip

High-solids TotalTread will cover completely in one coat. However, we recommend two coats to get the best combination of grip and durability. If you want even more texture, apply a third coat.

Looks cleaner after cleaning

Sounds obvious, but hard-scrubbing traditional non-skid coatings can leave ugly dark specks where the silica particles wear through. TotalTread is easier to clean because it’s less abrasive. And because it’s more abrasion resistant, the only thing hard scrubbing does is make it look as good as the day it was applied.

Create a custom non-skid color

Like the texture, but not the tint? Concocting your own color is easy. Just mix TotalTread colors, or blend a TotalTread color with a TotalBoat Wet Edge color.

Not just for your boat’s deck

Use TotalTread slip resistant paint where extra traction is needed, such as wooden stairs, steps, and docks.

How to apply maintenance coats of TotalTread

After a few years of use/exposure, you may want to recoat TotalTread to improve the color or texture, as the grit can wear down over time, especially in high-traffic areas. To recoat, clean/dewax the surface and scuff lightly with 220-grit or 320-grit sandpaper or a maroon Scotch-Brite pad. Scuffing will naturally knock some of the grit down. Remove scuffing residue and apply at least one, maybe two coats of TotalTread for a more true color and desired grit.

TotalTread Non-Skid Deck Paint Details

• Resilient, one-part polyurethane resin ready-mixed with unique Propyltex™ texturing agents for a tougher, slip-resistant surface.
• High-tech texturing additive adheres better and looks better longer than traditional silica non-skid additives.
• UV stabilizers allow colors and finish to withstand heavy use and harsh weather without fading, cracking, or peeling.
• The amount of texture is determined by the number of coats applied. More coats equals greater texture.
• Apply over fiberglass, wood, and previously painted surfaces in good condition.
• Colors: Available in Light Gray, White, Kingston Gray, and Sand Beige. The White, Kingston Gray, and Sand Beige colors match our TotalBoat Wet Edge Topside Paint colors. NOTE: The new Light Gray color was created for those who like their gray a little lighter, a little warmer, and a little less blue in tone. In comparison, Kingston Gray is a little darker and a little more blue in tone than Light Gray.
• Sizes: Quarts and Gallons

FREQUENTLY BOUGHT TOGETHER

Special Brushing Thinner 100

Dewaxer & Surface Prep Solvent

Spray Thinner 101

TotalFair Epoxy Fairing Compound

TotalProtect Epoxy Barrier Coat Primer

SEE HOW EASY IT IS TO USE TOTALTREAD

TECHNICAL DATA

• Substrates: Fiberglass, wood, previously painted surfaces, epoxy, properly prepared metal substrates
• Application Method: Brush, Roll, or Spray
• Application Temperature/RH: 50-90°F, relative humidity less than 85-90%
• Application Film Thickness: 1-2 mils dry @ 3 mils wet
• Number of Coats: 1-2
• Tack-Free Time: 1.5 hours @ 90°F, 3 hours @ 70°F, 6 hours @ 50°F
• Minimum Overcoat Time: 8 hours @ 90°F, 12 hours @ 70°F, 16 hours @ 50°F
• Colors: White, Sand Beige, Kingston Gray, Light Gray
• Finish: Flat, gritty
• VOC Content: Varies by color
• UV Stable: Yes
• Food Safe/Food Contact Safe (Once Cured): No
• Coverage (@ 3 mils wet): 80-100 square feet per quart, 350-400 square feet per gallon
• Primer: TotalBoat Topside Primer (wood and previously painted surfaces; not needed on properly prepared fiberglass), TotalBoat 2-Part Epoxy Primer (Metals), TotalBoat TotalProtect Barrier Coat (Fiberglass/Metals), TotalBoat Aluminum Boat Barrier Coat (Metals)
• Thinner: Brushing/Rolling - TotalBoat Special Brushing Thinner 100, 5-10%, if needed; Spraying - TotalBoat Spray Thinner 101, 10-20%, if needed
• Surface Prep Solvent: TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101 or TotalBoat Dewaxer & Surface Prep
• Cleanup Solvent: TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101 or TotalBoat Dewaxer & Surface Prep

• Interior/Exterior?
• Application methods:
• Application temperature & humidity:
• Number of coats:
• UV Resistant?
• Best for: Provides a non-slip surface on decks, docks, ramps, steps, cabin soles & other fibergalss and wood topside surfaces.
• Interior/Exterior? Exterior (above the waterline only)
• Thinner: Brushing/Rolling: TotalBoat Special Brushing Thinner 100, 5-10%, if needed; Spraying: TotalBoat Spray Thinner 101, 10-20%, if needed
• Application methods: Brush, roll, or spray
• Application temperature & humidity: 50-90°F; humidity 0-90%
• Number of coats: Two; between coats, sand lightly with 220-grit sandpaper
• Cleanup: TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101 or TotalBoat Dewaxer & Surface Prep
• Coverage: 250-300 sq. ft. per gallon
• UV Resistant? Yes
• Painting wood and fiberglass boat hulls above the waterline
• High gloss (all colors); Flat (black, white, and gray only)
• Interior and exterior (above the waterline only)
• TotalBoat Topside Primer (NOTE: Wet Edge can also be applied over TotalBoat epoxy primer systems, including TotalProtect, 2-Part Epoxy Primers, and Aluminum Boat Barrier Coat. See technical data sheet for details.)
• TotalBoat Special Brushing Thinner 100 (brush/roll) or TotalBoat Spray Thinner 101 (spray)
• Brush, roll and tip, or spray
• 50-90°F; humidity 0-90%
• 2-3 (minimum)
• TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101 or TotalBoat Dewaxer & Surface Prep
• 350-400 sq. ft. per gallon (approximately 80-100 sq. ft. per quart)

Elixir Enamel Topside Paint

• Painting signage and wood, fiberglass & metal boat hulls above the waterline
• No primer needed.
• Water, if needed, up to 20%
• Brush, roll and tip, or spray. For brushing, use a tapered polyester brush; for rolling, use a high-density foam roller cover.
• Soap and water
• 80-100 sq. ft. per quart (3 mils wet film thickness)

TotalBilge Epoxy Bilge Paint

• Painting bilges, bulkheads, lazarettes and locker areas
• Interior only
• TotalBoat TotalProtect — only mandatory on metals, but may be used on properly prepared wood or fiberglass, if desired.
• Brushing/Rolling: If needed, thin 5-10% with TotalBoat Special Brushing Thinner 100; Spraying: TotalBoat Spray Thinner 101, 10-20%
• Brush, roll, or spray
• 50-95°F; humidity 0-90%
• 1-2; between coats, sand lightly with 100-150-grit sandpaper
• 250-300 sq. ft. per gallon

Watch More Videos

YOU MAY ALSO LIKE

• TotalBoat TotalTread Non-Skid Deck Paint Technical Data

FREQUENTLY ASKED QUESTIONS

What are the most common applications for TotalTread Non-Skid Deck Paint?

How many coats should i apply, can i use this with totalboat wet edge topside paint, how does totaltread deck paint differ from traditional silica found in other non-skid paints, how long should i allow totaltread to dry and cure before walking on it, is this finish waterproof.

• Choosing a selection results in a full page refresh.

• 2024 BOAT BUYERS GUIDE
• Email Newsletters
• Boat of the Year
• 2024 Freshwater Boat and Gear Buyers Guide
• 2024 Boat Buyers Guide
• 2024 Water Sports Boat Buyers Guide
• 2024 Pontoon Boat Buyers Guide
• Cruising Boats
• Pontoon Boats
• Fishing Boats
• Personal Watercraft
• Water Sports
• Boat Walkthroughs
• What To Look For
• Watersports Favorites Spring 2022
• Boating Lab
• Boating Safety
• Ultimate Boat Giveaway

Best Non Skid Boat Deck Paint

• By Ric Burnley
• August 7, 2024

After 15 years, the non-slip paint on my boat deck looked faded and dirty. But I put off repainting until the non skid failed and I started slipping and sliding on the wet deck. While a freshly painted boat deck looks great, providing a non-slip surface is the first step in maintaining a safe boat. 

There are several steps to repainting a boat deck. Taping off the area, cleaning the deck, sanding the old non skid paint, cleaning again, painting, drying, adding another coat of paint, drying and clean-up are all essential to getting the job done correctly. 

But the most important step happened before I began the project. Choosing the best marine deck anti-skid paint for my boat deck is directly related to the quality of the final result. With so many choices for non skid paint to match my needs, I took a deep dive into the best boat deck paint for my boat. Here is what I learned.

Quicklook: 6 Top Boat Non Skid Deck Paint Options

• Best for Long-lasting Results : Pettit Paint EZ Deck
• Best for Impact Resistance : Pettit Paint Tuff Coat Rubberized  
• Best Textured Non Skid Deck Paint: KiwiGrip Non-skid
• Best Two Part Deck Paint: Interlux Perfection Two Part
• Best Budget Deck Paint: Interlux Interdeck
• Best Aggregate: Alexseal Non Skid Fine HD

Repainting the non-slip surfaces on the boat deck is a big job. Before picking an anti-skid paint, consider how often you use your boat, how much you have to spend, where you work on the boat and what equipment you have to get the job done. 

For easy application, choose a one-part paint system, or to match the boat’s color and provide a more durable surface, go with a two-part paint and non skid additive. To make sense of the choices, I narrowed down my list to the following best non skid marine deck paints for my boat.

Pettit Paint EZ Deck

Best for : Long-lasting results

The simplest way to achieve a durable and good-looking non skid deck surface is using a one-part deck paint with aggregate. Pettit Paint EZ Deck is the top performing deck anti-skid paint for easy application and fade resistance. After the deck surface is prepared, simply stir the EZ Deck to distribute the aggregate and apply three to four coats with a ⅜ inch nap roller. 

• One step process
• Ultraviolet filters prevent color fade
• Premixed aggregate

Disadvantages :

• Only available in three colors
• For best results, add EZPoxy Paint Enhancer

Price : $182.99/gallon

Pettit Paint Tuff Coat Rubberized 

Best for : Impact resistance

For high-traffic areas and hard use, rubberized deck paint offers a thicker and more durable surface. Often found on commercial vessels, rubberized marine deck paints are flexible, thick and super grippy. Pettit Paint’s Tuff Coat Rubberized non skid deck paint is a one-step paint created by cross-linking urethanes, acrylics, co-polymers and recycled rubber granules to maximize durability and performance. 

I like the rubber granules as the aggregate to maintain consistent texture and prevent wear and tear. The thick coat of rubber paint also provides shock absorption. Non-toxic and water based, Tuff Coat is easy to apply with a roller or brush and easy to clean up with soap and water.

• Thick material hides surface imperfections
• Submersible
• Shock absorbing rubber aggregate 
• Aggressive grip not comfortable on bare feet
• Matte finish only
• Requires primer

Price : $154.99/gallon

KiwiGrip Non-Skid System

Best for : Textured non skid deck paint

Most non-slip deck paint uses an abrasive additive to provide grip on slippery decks. Another option is using a thick deck paint and a special paint roller to dimple the paint for a non skid texture. KiwiGrip Non-Skid System doesn’t require mixing the aggregate with the paint and is softer on bare feet. Textured marine deck paint improves durability because as the paint wears it doesn’t release the aggregate. By changing the application process, customize the depth of the texture for more grip.

• One component
• No aggregate
• Requires a special roller or brush (available with the paint system)

Price : $47.99/liter

Interlux Perfection Two-Part Polyurethane Topside

Best for: Two-part non-slip deck paint

For a professional-looking non skid deck, a two-part paint offers the best color, finish and durability. Interlux Perfection Two Part Polyurethane Topside is packaged with the base and catalyst pre-measured for the simplest way for do-it-yourself boat owners to achieve professional results. Two-part paint is chemical, detergent and fuel resistant for the longest lasting deck coverage. Achieve the perfect non-slip surface by choosing the size and amount of aggregate to mix with the base paint. 

• Wide range of color choices
• Customizable aggregate
• High gloss finish
• Requires more prep and post work
• Best with paint sprayer

Price : $140.99/quart

Interlux Interdeck

Best for : Budget deck paint

An easy-to-apply anti-slip deck paint that won’t break the budget, Interlux Interdeck combines an advanced polyurethane with a fine grit aggregate for a one-step application. Spray, brush or use a roller to apply one to two coats of the deck paint. Interlux Interdeck has a low-sheen finish to prevent blinding sun glare off the deck.  

• Inexpensive
• Apply with sprayer, roller or brush
• Low sheen to reduce glare
• Only available in five colors
• Fine grit only
• No UV inhibitors

Price : $77.99/quart

Alexseal Non Skid Fine HD

Best for : Adding aggregate to two-part polyurethane

Two-part polyurethane paint offers the most options for color, finish and durability. By adding a separate aggregate, two-part paints can be customized for grip. Alexseal Non Skid Fine HD is a clear aggregate added to two-part paints to increase grip in slippery surfaces. The advanced synthetic clear aggregate won’t change color as the paint wears for years of reliable grip. Available in fine and coarse grit, choose the size of the aggregate to match the application. Use fine grit in low-traffic areas and heavier grit in spaces requiring more traction.

• Doesn’t fade or separate from paint
• Mix with any two-part polyurethane paint
• Available in fine or coarse grit for custom application
• Requires measuring and mixing

Price : $127.99

Common Types of Non Skid Boat Deck Paint

Do-it-yourself boat owners have several choices for easy-to-use non-slip deck paint that will maintain a safe, colorful deck coating for years of heavy use. For high traffic areas requiring chemical and fuel resistance, choose a rubberized or textured paint. 

To create a smoother texture with customizable grip, polyurethane paints with added aggregate look great and prevent slipping. Polyurethane deck paint with fine aggregate is the easiest to clean after a day on the water. Read ‘ How to Repair Gelcoat ’ to learn about touching up or repainting the topcoat on your boat.

One Part Polyurethane

Easy to prepare the surface. Easy to apply with a roller or brush. No mixing required. 

Two-Part Polyurethane 

Most durable and best looking topcoat paint. Two part polyurethanes are great for matching the boat’s color and finish. Requires mixing base with catalyst and adding the grippy aggregate. The professional-looking result is worth the extra effort.  

Thick and durable, rubberized deck coating is non-slip and protects the surface from damage. Heavy rubberized deck paint also covers up imperfections in the surface, so it’s great for repainting a non-slip deck. Add aggregate to the rubber paint or use a rubberized paint with non skid particles already added.

Textured deck paint creates a non-slip surface with a rough surface texture. Textured anti-slip paints don’t require adding or mixing aggregates. Textured paints are more durable than aggregate paints because they wear evenly without exposing the aggregate embedded in the paint.

Non Skid Coatings

By adding non skid coatings to base paint, I can customize the color, finish and grit to match my needs. In a high-traffic area, I can use a coarse grit aggregate. For areas that don’t see as much action, I can apply a finer grit. I can even choose silica, wood, rubber or synthetic aggregate to adjust the size, shape and traction of the aggregate.

Protect Yourself With the Right Boat Deck Paint

When it’s time to repaint the non-slip surfaces on my boat, I have a wide range of paints to choose from. Depending on the surface, how I use my boat, my budget and my skills and tools, I have easy-to-use paints and high-quality, customizable systems. For the best look and performance, a two-part polyurethane with added aggregate produces the most professional and durable finished product. Sacrificing some color and finish choices allows me to use a one-step non-slip deck paint with aggregate mixed into the single-part paint. 

For the best durability and traction, rubberized paint not only provides solid traction but it absorbs shock and protects the deck surface. Or, I can save time and energy and create a non skid surface by using a textured paint and a special paint roller. 

Not only does a fresh coat of non-slip deck paint look great, but preventing slips and falls on wet surfaces is the first step in avoiding serious injuries. Once I realized how easy it is to repaint my deck, I was more confident to tackle this project on my own. 

How long does boat paint last?

Depending on how often the boat is used and how it is stored, deck paint can last for five to 10 years. Two-part polyurethane paints last the longest while rubberized paint needs to be sanded and replaced more often. Check the manufacturer data sheet for information on durability and fade resistance.

How do you prepare a boat deck for painting?

Each type of deck paint requires a different process for preparing the underlying surface. The first step is cleaning the surface and repairing damage. Rubberized or textured paints may only require a clean surface before applying the material. Polyurethane paints work best if the surface is washed, sanded and cleaned to improve adhesion and curing. Other types of paint require removing the existing paint and priming the surface. Each paint comes with a data sheet that details the recommended steps to prepping, applying and cleaning up. 

How many coats of deck paint do I need?

Thick rubberized and textured deck paint can be applied in one coat. Polyurethane and other paints call for multiple coats to distribute the aggregate and evenly cover the area. Be sure to wait for the paint to cure before applying the next coat. Check the manufacturer’s data sheet for curing time and the recommended number of coats. 

• More: Affiliate , boat cleaning and care , boat maintenance , How-To , paint

More How To

How to Choose a Trailer Winch

Midseason Sterndrive Maintenance

How to Properly Splice Wires on Your Boat

Navigating Safely Around Anglers

Bayliner 2024 D Series Deckboats Debut

Is Your Trailer Right for Your Boat?

• Digital Edition
• Customer Service
• Privacy Policy
• Terms of Use
• Cruising World
• Sailing World
• Salt Water Sportsman
• Sport Fishing
• Wakeboarding

Many products featured on this site were editorially chosen. Boating may receive financial compensation for products purchased through this site.

Copyright © 2024 Boating Firecrown . All rights reserved. Reproduction in whole or in part without permission is prohibited.

Ridetheducks.com is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

The Best Boat Deck Paints in 2024

The only time when your boat’s deck is dry is when it is out of the water, but that defeats the point of the vessel. Simply standing on a swaying and swerving boat is hard enough as it is. However, it gets exponentially more difficult when the deck is wet. To make it easier for you to keep your footing, you need the best boat deck paint.

You can find different brands of deck paint on the market today, but not all are worth the time and money they cost. If you want to get the best boat dock paint, continue reading this article.

1. TotalBoat TotalTread Non-Skid Deck Paint

2. tg deck porch & patio anti-slip paint, 3. kiwigrip non-skid coating, 4. slipdoctors duragrip non-slip paint, 5. tuff coat ut-100 non-skid coating, 6. evercoat 853 skid-no-more rubberized coating, 7. interlux yjf684/qt interdeck deck paint, 8. durabak 18 textured non slip deck paint, 9. liquid rubber polyurethane dock coating, 10. insl-x su031009a-01 sure step coating paint, who is this for, features to consider when buying a boat deck paint, advantages and disadvantages of using a boat deck paint, care and maintenance, frequently asked questions, best boat deck paint reviews.

I expected to get a finish that has plenty of traction, and that is exactly what I got with the TotalTread. This paint contains hundreds of thousands of tiny silica beads mixed in polyurethane paint. When it dries and cures properly, you get a somewhat semi-glossy finish that provides plenty of grip.

Now, even though the surface has plenty of traction, it is not quite as abrasive as most of the other brands of deck paints. Other deck paints leave a finish that is almost as coarse as concrete pavement. You would not want to skid on your bare knees on those. On the other hand, the finish of this product is comfortable to walk on even on bare feet.

Another reason why I like this product is its excellent coverage. This paint rolls on thin and yet the microbeads still spread evenly across the surface. One gallon of this paint is enough to cover up to 300 square feet, making it more than enough for a medium-sized boat.

No matter what kind of boat you have, you can trust that this product will adhere to its surface without any problems at all. I have used it on an aluminum boat (with a self-etching primer undercoat) and fiberglass and both of them turned out great. I also used it on my wooden deck at home and it worked well there, too.

The issue I had with this paint, though, is its very long curing time. It probably took at least five days for this paint to dry and cure properly, which was a pain because I needed to cover the entire deck to prevent debris from sticking on the paint.

• Provides a textured surface that guarantees plenty of traction
• Not as abrasive as deck paints with silica additives
• Excellent coverage per gallon
• Can adhere on almost all kinds of surfaces
• Formulated for marine environments
• Requires a couple of days to dry and cure completely

Despite the long curing time, I would still recommend this non-slip deck paint to other boat owners.

One thing that pleases me about this paint is that it dries and cures fast. I needed to use my boat for the weekend, so I painted the deck around Thursday afternoon. By Saturday morning, the painted deck was already completely dry and attained its full durability. The finish was hard and completely waterproof. It is even ready for the water.

Speaking of the finish, although it was nicely textured and provided more than enough grip, it was not quite as abrasive as other deck paints I used in the past. In fact, I found it comfortable walking on the boat deck barefoot and it did not bother me at all.

This paint is originally for high foot traffic areas like porches and patios, so a boat deck, which has significantly fewer people walking on it is not a problem at all. I believe, based on the couple of months that passed since I painted my boat with this product, that it could potentially be a couple of years before I will need to repaint.

Another reason why I like working with this product is that it is easy to use. I used it on a previously painted surface and all I needed to do was scuff up the surface using large-grit sandpaper. There was no need for a primer undercoat. This paint rolled on smoothly and evenly.

However, I need to reiterate that it is mainly for residential purposes, so using it on a boat deck, especially one that goes out to sea, can potentially weaken it and cause serious damage.

• Fast-drying formulation
• Provides textured, but non-abrasive finish
• Highly durable – It can withstand heavy foot traffic.
• Easy to use – It does not require any primer.
• Low-VOC as it does not emit any harmful fumes
• Only suitable for freshwater environments

Despite this product being made for residential applications, I discovered that it also works great as a boat deck paint.

The feature that makes this deck paint different from the rest is that it does not contain any silica sand. The texture comes from the roller that comes with the kit. The finish provides plenty of grip, but it is not in the least abrasive. You can lie down on the finish and it will not hurt at all.

You might think that you will need to do some mixing, but that is not the case at all. This product is usable right out of the can. Obviously, you will need to do a bit of mixing to get a uniform consistency, but after that, you can just use a simple brush and the textured roller brush that came with the kit.

Speaking of the texture, the nice thing about this product is that you can adjust it to your liking. Just apply the deck coating on the surface then use the roller to spread out the product evenly. The more you use the roller, the less aggressive the texture becomes.

I dragged coolers full of beverages over the deck of my boat every time I go out on the water, and there are still no scratches on the surface. If a heavy plastic cooler with hard plastic feet were not able to leave a mark, foot traffic won’t either.

The problem that I had with this paint is that I needed to apply it in small areas because it tends to dry quickly. When it is already dry, you won’t be able to apply texture on it using the roller.

• Does not have silica aggregates as the texture comes from the roller
• Easy to use since it comes in just a single-part formula.
• Boasts of an adjustable texture
• Highly durable – It can easily deal with a lot of foot traffic
• Needs to be applied per area since it dries too fast

Even though it can be a bit challenging to apply, seeing as it dries a bit too quickly, this deck paint is still one of the best I have ever used.

This product is an epoxy boat floor paint, so you know that it will be durable once you let it dry and cure properly. I used it on a metal staircase at home, and it made a difference. Aside from providing excellent grip and safety, it also gave the surface a nice and somewhat organic feel. It is different from the feeling of bare metal.

Aside from metal surfaces, it is also ideal for wood, fiberglass, and others. However, you will need to lay down a coat of primer before applying this product. I used this same product on the wooden deck of my sailboat and the deck in my backyard. I noticed that those surfaces still look good until now.

Another reason why I like this paint so much is that it provides grip without turning the surface into basically sandpaper. I have tried other grip paints before and they were so rough that my dogs would not even walk on them.

It is also nice that this grip paint comes in 10 different colors unlike most that only come in either white or black. I also like that it has a clear option. However, it is not crystal clear. It is more like a very light amber, so you should reconsider using the clear if you will be painting over a white undercoat.

Speaking of the undercoat, although the manufacturer stated that you will not need a primer for most surfaces, it is best that you do especially on metal surfaces. The conditions need to be perfect if you want this product to adhere to a bare metal surface.

• Highly durable and epoxy-based
• Ideal for use on any surface – Some surfaces need a primer
• Provides plenty of grip without being too abrasive
• Comes in 10 semi-gloss color options and can still be tinted
• Easy to use without the need for any additives
• Needs a good undercoat to adhere better

Aside from the need for a bit of surface preparation, I am extremely impressed by how this product performs. I would gladly recommend it to anyone who needs to add more safety to their boats or homes.

I have an aluminum and a fiberglass boat and I used the same gallon tin can of this product for both, and the finish turned out great. Although I needed to use a self-etching primer on the aluminum boat, the non-skid coating went on evenly and without any issues at all.

It is also very easy to use. This product is a single-ingredient formula, meaning there is no need to add any additional substances into the tin. Just mix the paint well upon opening because the silica beads have settled at the bottom due to being in storage. You even need to stir the paint a couple of times while you are using it.

I also like the non-hazardous formulation of this rubberized boat deck coating. It is water-based paint, so you just need a wet rag to clean it up. Moreover, there are no VOCs, so there are no fumes coming up from the paint. However, I still recommend wearing a mask while applying this paint, just to be on the safe side.

Once fully dried and cured, the finish this paint leaves behind is extremely durable. I first thought that it would peel easily because it has a rubberized texture, but I was wrong. I have dragged heavy tackle boxes and coolers full of beverages over the surface of this paint, and they barely made a mark.

Although I do like using this paint, it is a pain that you still must lay down a coat or two of primer to get this to stick. It is especially true when painting on bare metal. This product would have gotten higher marks if it can readily bond onto any surface.

• Applicable for all kinds of boat decks
• Ready to use straight from the tin
• Non-hazardous formulation and water-based
• Durable and resistant to UV rays and caustic chemicals
• Comes in an array of colors

Still need a primer undercoat

Although this paint is far from perfect, it is still one amazing option for the best paint for aluminum boat floor. Taking into consideration the durable finish that you will be getting, making a couple of small compromises should not be a problem.

Aside from the deck of my boat, I used this product on everything that I think needs a good non-slip surface. These include the front porch steps, the area around the pool, the entire surface of my backyard deck, and the entire floor of my garage. Although it needed a primer for bare metal, it needs minimal surface prep.

The finish left by this paint is both rubberized and textured, thus giving two layers of safety. I can attest that the finish remained non-slip even when it is wet yet it does not feel like you are walking on sandpaper when it dry. As mentioned earlier, I used it to paint the perimeter of my swimming pool and it’s comfortable to walk on.

Durability is not an issue, either. I used this paint for my aluminum boat a year or two back, and it still looks and works well. There is a bit of discoloration due to aging and I discovered some places that are a bit worn but nothing too bad. I use my boat every weekend, so it is surprising that the metal underneath isn’t showing yet.

The best thing about this paint, in my opinion, is its excellent paint coverage. I bought an entire gallon thinking that it would be enough for my 18-foot boat, and after two coats, there was still a lot of paint left in the can. The remaining one is more than enough for all the steps on my front porch.

However, because this paint is a bit on the thin side, it can be tricky to apply without pushing the silica beads from clumping up to one side.

• Provides a rubberized and textured surface
• Excellent paint coverage
• Gives a non-skid but not abrasive surface
• Highly durable and can last for at least a couple of years
• Can go on any surface that needs to be non-skid
• Can be tricky to apply since it is a bit thin

Once you do make it over the slight learning curve to use this product, you will realize that it is an excellent boat deck paint on a budget, among others.

I wanted a paint that is convenient to use as I do not have the time nor the equipment to mix paints. I liked how the only thing I needed to do before using this paint is to mix the contents of the can to re-distribute the micro-beads. After a couple of minutes of mixing, it is ready for application.

It is the best non-slip deck coating that I have used so far for my seafaring vessel. Once properly cured, the finish is completely waterproof and resistant to the corrosive properties of saltwater. It is also incredibly resistant to the UV rays of the sun, which is a big plus because I usually stay the entire day out in the water.

As mentioned earlier, I like this paint because it was convenient to use. Even applying it on the surface is quite easy. I did not need any special painting tools whatsoever. I only need a small nap roller brush and a couple of foam brushes for the hard-to-reach areas.

It has been almost a year since I painted the deck of my boat with this product and it has yet to show any signs of wear. Although the high traffic areas did get a bit thinner, the metal underneath is yet to show through and the surface is still non-slip.

This product would have gotten higher scores if it did not need a primer for most of the non-porous surfaces. On the other hand, applying a primer is easier and faster than scuffing and completely cleaning the surface to paint on.

• Ready-mixed, usable immediately out of the can
• Highly resistant to saltwater corrosion
• Easy to apply using a simple nap roller
• Highly durable as it does not chip nor peel
• Provides a low-sheen and glare-proof finish
• Still needs an undercoat of primer to adhere properly

It is basically polyurethane paint with silica microbeads, so you can be sure that it will take a couple of years before you need to repaint. However, before that time comes, you will have a nice-looking and non-slip surface.

The thing that I liked the most about this product is that once it cures properly, the surface turns rock solid. By my estimate, you need to try hard to even make a mark on the surface. It has been almost a year since I used it on my boat and after countless weekends of fishing trips, I have yet to see any noticeable damage on the surface.

Speaking of the finish, I was surprised at how many colors are available. I initially planned on getting the white color and have it tinted to the color I want, but then I saw that the color was already available.

Back to the finish provided by this product. Aside from being solid, it is also highly resistant to abrasion. I have dragged coolers full of fish and beverages over the deck, and they did not even leave a mark. This paint is also marine-grade so it is impervious to the corrosive qualities of saltwater. It can also withstand the UV rays from the sun.

The best thing about this paint is that it cures faster when exposed to moisture. Once the paint dries to the touch, the boat is ready to launch. It is formulated in such a way that it will continue to cure even when the surface gets wet. The curing process even accelerates a bit when the surface is wet.

If you have even just half a gallon of this paint leftover, you need to use it immediately because no matter how tight you replace the lid, the contents will turn solid after a week or so.

• The finish is highly resistant to abrasion, chemicals, heat, etc
• Comes in dozens of colors
• Cures when exposed to moisture
• Contains recycled materials
• The finish is flexible and completely waterproof
• Cures fast and does not store for very long

I have yet to see a textured deck paint that can rival this product in terms of durability. If you are looking for a long-lasting finish, which I am sure you are, then this one comes highly recommended.

Although the brand name is Liquid Rubber, the finish provided by this paint is more like a hard shell. The surface provides more than adequate grip, but it is not as soft as actual rubber. It is a good thing as it proves that the coating can withstand a lot of foot traffic.

It is an almost perfect coating for the deck of a boat as it is completely waterproof. I applied four coats of it on the deck of my fiberglass boat a couple of months ago, and it is still holding strong.

I had half a gallon of this paint left over from when I painted my boat, so I figured I will use it for my backyard deck. I just power washed the deck to get rid of any dirt and debris, and this paint went on smoothly. Aside from protecting the wooden deck from rot, it also gave a nice non-slip surface.

I also liked how easy it was to use. I just used a couple of wide regular paintbrushes and the product went on evenly on the surface. After brushing on the product, I then used a nap roller brush to get rid of the brush strokes and distribute the microbeads evenly.

However, be aware that this paint is quite thick, so you should not use a regular roller brush. If you do, you will only be pushing the microbeads to the sides. You have to be a bit more patient and just use a regular brush.

• Provides a hard and durable polyurethane shell
• Completely waterproof and UV-stable
• Can protect wood decks from rot
• Prevents corrosion due to saltwater exposure
• Easy to use; only requires a regular brush or nap roller to apply
• Very thick consistency – Regular roller will not even work

Even though I ran into some problems with the application of this paint, I was very pleased with how the finish turned out. Undoubtedly, it is an excellent option for the best paint for a fiberglass boat deck available today.

I already expected this product to provide a great non-slip coating, but I was surprised at how durable the finish is. I used it on the front steps of my home, and even after close to a year, there isn’t even any sign of wear on the surface.

Speaking of wear, this product has a high resistance against abrasion. I have been dragging all sorts of heavy items all over the surface and it did not show even the slightest sign of wear. Aside from that, it provided a waterproof seal all over the surface of the steps that prevent water from seeping in and causing damage.

I was also impressed at how fast it dried and cured. I was prepared to have the family walk around the house and go through the back entrance the whole day to let the front steps dry. However, they were perfectly dry early in the afternoon. This paint saved me from a lot of grief.

Another nice thing about this paint is that it is so thick that it also acts as a sealer. This filled in a lot of the larger cracks and pitting on the steps. It made the steps look new. The surface of the steps looks flat and even again, but thanks to the coating, it is very grippy.

Speaking of an even coat, it was a bit difficult to get it to look that way. Because of the thick consistency of the paint, applying it evenly was quite difficult. It took me an hour or so to figure out the proper way to do it.

• Provides a durable, and waterproof finish
• Highly resistant to abrasion
• Dries and cures quite fast
• Fills and seals cracks to prevent further damage
• Hard to get an even coat

Even though there was a bit of a learning curve, it is still one of the most durable non-slip coatings I have ever had the pleasure of using.

This product is for boat owners who want to make their boat decks safer to walk on. Homeowners can also benefit from this kind of paint, especially if they want to make certain surfaces, like stairs, decks, and porches, among many others, skid-proof and safer.

Do you want to start shopping for the perfect deck paint that you can use? Then make it a point to pick a choice based on these features and factors:

Non-slip Surface

The real reason why you got boat deck paint is that you want to give your boat a safe non-slip surface. The paint that you get needs to provide enough texture for your feet to grip onto. However, it should still not be so abrasive that it can be excruciating when walking barefoot.

Drying and Curing Times

If you are an avid fisherman, or if you cannot get enough of being on the open water, then you want to use a paint that dries and cures quickly. Ideally, the paint should be dry enough for launch in half a day or so, and around a day or two to cure completely.

Ease of Application

You do not need to be a professional painter to use the product. The paint you buy should be easy to apply using a simple paintbrush or at the very least a nap roller. Also, invest in a paint that does not require a primer before application. It should be able to adhere to the surface without too much preparation.

Most boat deck paints come in either black or white. However, some are also available in vibrant colors. If you are not that concerned about how your boat deck looks, then the basic colors will be enough for your needs.

On the other hand, if you want your boat deck to match the other components, you can maybe find the exact match you need. You can also have your paint tinted the way you want.

Advantages:

• Makes surfaces easier to walk on, even when wet
• Protects the surface against abrasion
• Gives a matte and non-glare surface

Disadvantages:

• Somewhat hard to distribute the grit evenly

The most important thing that you need to remember when you use a boat deck paint is that it is necessary to let it dry and cure completely before you walk on it. Moreover, you need to clean the non-slip surface regularly.

Not only does the surface provide grip for anyone walking on it, but the textured surface also retains dust and dirt. Use a mop to clean the surface properly, but don’t use any strong detergents as they can damage the finish.

Can I use Marine Paint on my Deck?

Yes, you can use marine paint on your boat deck. However, unless you add silica microbeads into the paint, the finish would not be that easy to walk on. It will also be most likely unsafe once you are on the water. On the other hand, there are marine-grade boat deck paints that are more convenient to use. They are also significantly safer.

How to Paint a Fiberglass Boat Deck?

Painting over fiberglass is not as difficult as most people think it is, but it can be quite tedious. First, you need to completely wash the surface that you will be painting. Check the surface if there are any cracks or pitting. Fill them in using epoxy filler.

After that, you have to use large-grit sandpaper. Use it lightly, making sure that you only remove the surface paint and get the surface nice and even.

Wipe the surface using a damp rag to get all the dust. After that, you can then proceed to paint the surface using fiberglass boat deck paint . Use multiple thin coats for an even and glossy finish.

Using the best boat deck paint will add an entirely new level of safety. With the help of this paint, you will no longer have to worry about precariously slipping and sliding whenever you take your boat out to the water, which is extremely dangerous.

Giving your boat a safe and slip-proof deck will make all of your boating trips all the more enjoyable. The reason is that you will no longer need to always watch where you step.

Leave a Comment Cancel Reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Best Boat Deck Paint

December 22, 2022

‍ Key Takeaways

• Boat deck paint is a vital component of boat maintenance. You safeguard not only your boat but also yourself. With the aid of paint, the boat surface is rendered non-slip and will appear as good as new.
• The boat deck gets damaged if not taken care of. Thankfully, applying deck paint can reduce the chances of wreckage. All you need to do is choose the best boat deck paint after weighing the pros and cons of each one of them.
• Make it a habit to clean the boat frequently. Letting the dirt accumulate deteriorates the paint. While cleaning the vessel, avoid using corrosive cleaners and use safe products.

‍ You've probably heard of boat deck paints before, but did you know that there is an array of boat paints on the market?

The best boat deck paints are TuffCoat UT-100 Coating, TotalBoat TotalTread Deck Paint, and Rust-Oleum Marine Topside Paint. The deck is highly exposed to foot traffic and harsh weather, so good paint should offer a sturdy finish to protect it.

As a practical boat owner, I’ve used various of these paints for my DIY projects, and I can attest to the best boat deck paints. Besides my personal experience with these paints, I consulted with many boat owners and came up with the following list.

Table of contents

6 best boat deck paints.

Below are six boat deck paints, some indigenous and some proprietary, that have so far proved durable and retained a remarkable level of adhesiveness.

1. Tuff Coat UT-100 Coating

Paint Specifications

TuffCoat UT-100 coating features a single component, water-based non-skid coating that creates a long-lasting finish on the decks. This paint features among the best boat deck paints as it is non-submersible and aims to provide a durable, attractive, and impact-resistant surface for decks.

Tuff coat paint is available as a flexible matte finish. Therefore, dryness creates a thickness of 30-35 mils, which can hide significant imperfections on the deck surfaces. It also adds non-skid properties to provide additional safety.

Since the paint is made through a unique process of cross-linking acrylics, recycled rubber granules, urethanes, and co-polymers, it creates a long-lasting and non-slip finish.

Paint Performance

Tuff Coat is a single component, water-based coating and thus is fast drying. It is designed to provide highly durable, impact-resistant, non-slip surfaces. Due to its unique composition, this paint has a submersible medium texture, giving it a long-lasting finish.

What Sets this Paint Apart

• The paint is UV and chemical-resistant.
• Depending on the surface area, you can apply it by roller or spray.
• It is excellent for metal surfaces, fiberglass, and previously painted deck surfaces.
• It comes in varieties of colors (up to 15 colors).
• This paint is durable, water-based, and flexible.

Benefits of the TuffCoat Paint

• This paint has a single-ingredient formula, which means it does not require additional substances and can be used for all kinds of boat decks.
• Unlike other paints, Tuffcoat features a non-hazardous formulation.
• The deck surface is unlikely to peel as this paint leaves a rubberized texture which is highly durable.

Drawbacks of this Paint

Although the Tuffcoat paint features among the best, its major shortcoming is that you will require to use a primer undercoat.

2. TotalBoat Deck Paint

The TotalBoat TotalTread Paint is a unique, slip-resistant coating that is well known for creating durable high-traction surfaces. Due to its polyurethane's low-glare finish, this paint lasts longer as it creates a less abrasive surface.

This deck paint is resilient as it has its polyurethane resin readily mixed with unique texturing agents to achieve a slip-resistant surface. Additionally, its UV stabilizers allow its colors and finish to withstand harsh marine weather.

The TotalBoat deck paint features round Propyltex particles that enhance its grip and durability for a more abrasion-resistant surface.

You should use two coats of paint to get the best combination of durability and grip. You can, however, opt for the High-solids Total Tread deck paint that covers the deck in the coat. This paint is less abrasive and hence easy to clean.

This paint is slip-resistant. Therefore, it comes in handy when used in areas where extra traction is needed. Applying this paint using a brush or a roller is easy. One gallon of paint is likely to cover 250-300sq.

• TotalBoat deck paint features a unique formula that creates a high-traction, comfortable, and durable deck surface.
• This paint is versatile and can be applied to other parts of the boat.
• Its UV-stable formula offers a long-lasting finish that is not likely to peel, fade, or crack.
• It is easy to apply.

Benefits of the TotalBoat Total Tread Non-Skid Deck Paint

• This paint offers an economical way to get an attractive and low-glare surface.
• The paint's rubbery texture is ideal for maximum traction, and unlike most non-skid paints, TotalBoat is not prone to abrasion.
• Through its non-skid properties, this paint reduces slip and fall accidents and lowers the possibility of wear and tear.
• Its wax texturing agents allow gloss control.

Drawbacks of the TotalBoat Total Tread Non-Skid Deck Paint

The major drawback of the TotalBoat deck paint is that you require two coatings because more coatings enhance the grip. Additionally, your mixing skills should be top-notch to achieve the desirable results.

3. Rust-Oleum Paint

Rust-Oleum Marine Paint is designed to provide gloss retention, UV resistance, and durability in extreme weather conditions and other elements. The paint has an oil-based formula which makes it flexible and easily applicable.

Boats are huge investments, and taking ultimate care of these vessels is crucial. Rust-Oleum Topside paint offers maximum performance that prevents everyday wear and tear, keeping your boat stylish.

This paint creates a durable coating that resists abrasion and extreme weather conditions. The layer is ideal as its durability is unmatched. Additionally, it offers long-term UV protection.

Another desirable feature of the Rust-Oleum Topside Paint is its superior gloss retention. The excellent gloss retention and smooth finish maintain the aesthetics and elegance of your boat's surfaces.

This varnish is created to expand and contract with varying temperatures. This feature enables it to resist common damaging elements. This paint is made from a modified alkyd, which makes it highly durable.

• Rust-Oleum Topside Paint slowly releases copper for superior fouling protection. This highly deters marine growth build-up.
• It has a fine ground pumice base that can mix with any latex or oil-based paints for ultimate grip.
• This paint has brilliant colors that can withstand extreme weather conditions.
• This paint is capable of covering a vast surface, and it dries up fast.

The benefit of the Rust-Oleum Marine Topside Paint

• It protects the deck from UV damage.
• It is salt, moisture, and mildew resistant.
• It adds an anti-slip grip which enhances safety.
• The paint protects the deck from corrosion.
• It offers exceptional gloss retention properties that resist fading and cracking.
• One can use it for various surfaces of the boat.
• It provides a brilliant finish and long-lasting protection.

Drawbacks of the Rust-Oleum Marine Topside Paint

The Rust-Oleum Marine paint is loved for its potentiality and performance. However, since this paint has an oil-based formulation, it tends to create a mess and is pretty hard to clean up.

The irking fumes produced by this paint are pretty irritating.

4. KiwiGrip Non-Skid Deck System

KiwiGrip Non-Skid Deck System is a durable, non-skid coating that is simple to apply and creates a customizable texture. This paint spreads quickly through the deck area, offering an excellent, high traction surface.

This paint is a homogeneous material; therefore, it does not require fillers like sand, beads, rubber fleck, or walnut shells. For ultimate protection, this paint is loaded with a UV stabilizer. Alternatively, it features among the best boat deck colors for its low glare, even under the sun.

One liter of KiwiGrip can cover a surface of about 20 square feet. The paint is easy to apply, and the package includes a proprietary roller ideal for creating a high traction surface.

The KiwiGrip paint has varying application techniques depending on your preferable texture. You can change the surface from a rolled pleasure boat texture to an industrial aggressive work boat texture.

Unlike two-part anti-slip deck coatings, KiwiGrip is applied using a brush which is considerably faster and easier. With this paint, repairs are invisible. This paint also features a thick consistency which dries up equally fast.

• KiwiGrip is easy to maintain as its homogeneous material does not tend to wear through fillers. This paint's texture is achieved through the roller and not the stuffing.
• It is available in five colors, with UV stabilizers and low glare features.
• You can apply this paint through various application techniques.
• You can use it in many applications, such as wood, fiberglass, epoxy, concrete, and metal.
• KiwiGrip paint is easily tinted to come up with custom pastel colors.

Benefits of the KiwiGrip Non-Skid Deck System

• It is a revolutionary coating that is highly durable.
• This coating is easy to clean and recoat. The good thing about this coating is that its repairs are invisible.
• The paint’s application techniques are adjustable.
• KiwiGrip is a water-based acrylic, and therefore it is environmentally friendly.
• This paint altogether lowers the finished cost of application hence saving money.
• One single coat of this coating is enough for the deck surface.

Drawbacks of the KiwiGrip Non-Skid Deck System

This coating feature's only shortcoming is that it requires gradual application since it dries too fast.

5. Interlux Interdeck Deck Paint

Interlux Interdeck Deck Paint is a slip-resistant deck paint suitable because it contains good mineral additives for hard-wearing and non-slip surfaces. This paint includes fine aggregates that make it easily applicable to all substrates.

This paint has a tough polyurethane resin that provides a high-quality slip-resistant finish. Interlux has a low-sheen finish that reduces the sun's glare and wears and tear.

You need to apply a minimum of two coats to attain a desirable outcome. This paint requires a few days to cure before you expose it to the marine environment. When applied correctly, this paint guarantees a long-lasting effect.

The solid polyurethane resin aggregated in this paint ensures maximum protection against wear and tear. Fundamentally, this paint offers a long-run solution for slippery decks.

• Interlux deck paint features a slip-proof characteristic that is appropriate for all substrates.
• The paint comes with acceptable mineral additives to increase its non-slip capabilities.
• It protects the deck from UV rays.

Benefits of the Interlux Interdeck Slip-Resistant Deck Paint

• The low sheen finish of this paint prevents the sunlight glare.
• It comes in a variety of colors.
• It contains fine aggregates that enable it to spread quickly over any surface.
• This paint is not cumbersome to use.

Drawbacks of the Interlux Interdeck Slip-Resistant Deck Paint

This paint needs a minimum of two coats to attain a desirable outcome. Again, this paint takes quite a long time to cure.

6. Evercoat Coating

The Evercoat Coating is an innovative paint that performs to achieve top-notch results. This deck paint is texturized with a non-skid formulation that contains acrylic latex and ground rubber.

You can apply Skid-No-More paint to fiberglass, wood, metal, or concrete. This non-skid coating features non-abrasive, elastic, and resilient properties. It can be applied to deck surfaces using a paintbrush, a roller, or a squeegee.

This paint is ideal for creating a texturized, skid-resistant, acrylic latex coating for boat decks. It offers an excellent alternative for non-skit tapes. Evercoat paint provides a controlled release of latex to excellent anti-skid properties.

• You can apply it to a wide range of surfaces.
• It gives an even paint distribution.
• This paint is a certified A1 acrylic rubberized non-coating.

Benefits of the Evercoat Skid-No-More Rubberized Non-Skid Coating

• This paint achieves an ergonomic grip.
• It's an excellent option for its even distribution.
• It offers an acrylic rubberized coating that protects the deck from harsh weather elements.
• It can be tinted using color agents.

Drawbacks of the Evercoat Skid-No-More Rubberized Non-Skid Coating

This paint can be a bit messy during application. However, there is no cause for alarm as it is easy to clean.

Another drawback is that this paint does not last long as expected. It deteriorates quickly.

Factors to Consider When Buying Boat Deck Paints

As stated earlier, boats are enormous investments that require premium maintenance. Lately, finding the best boat deck paint could be a cumbersome process as numerous brands in the market are claiming to be the best picks.

Fortunately, there are features to look out for and factors to consider to get the ideal deck paint. Below are factors to consider for a wise product investment regarding boat deck paints.

The boat deck undergoes significant exposure to foot traffic, UV rays, and extreme weather conditions. Whatever deck paint you choose should be tough enough to withstand the above elements.

Suitable deck paints create a durable finish, and protecting the deck is their ultimate goal. Additionally, the paint should not deteriorate quickly. It should be long-lasting.

Apart from offering protection to the deck, deck paints are crucial in guaranteeing safety to the boaters. Always ensure that you get boat deck paints that are slip-resistant. Alternatively, boat deck paints should protect the decks and surfaces from cracking, peeling, and fading.

To ensure ultimate protection, go for paints with desirable formulas and textures. The right deck paint also guarantees comfort. The paints fill up cracks and gaps that are present in the deck.

Paints repel UV rays damage, molds, rusting and rotting in wooden boats. For boaters who love cleaning their vessels from time to time, paint eases the job. This is because excellent finishes require effortless cleaning.

Color plays a significant role in the aesthetic enhancement of the boat deck. Deck paints are available in many colors, and you can choose one that suits your deck. Choose colors that are easily replaceable whenever they fade.

It is important to note that dark colors on the deck readily absorb heat. Therefore, you will be required to wear shoes on board. On the contrary, a white-colored deck remains cool even under the sun. You can thus enjoy the freedom of being barefoot onboard.

This article may contain affiliate links where we earn a commission from qualifying purchases. The images and content on this page may be created by, or with the assistance of, artificial intelligence, and should be used for entertainment and informational purposes only.

About THE AUTHOR

Brian Samson

I have a deep love of houseboating and the life-changing experiences houseboating has brought into my life. I’ve been going to Lake Powell on our family’s houseboat for over 30 years and have made many great memories, first as a child and now as a parent. My family has a passion for helping others have similar fun, safe experiences on their houseboat.

Trending Now

After spending over 30 years on houseboats, the memories and knowledge we've gained will never fade. Learn from our experiences here on LakeWizard. You can read more about us and our team, here .

©2024 LakeWizard. All rights reserved.

You can email us at [email protected]

LakeWizard.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs including but not limited to ShareASale, CJ, and ClickBank, and is compensated for referring traffic and business to these companies.

• Privacy Policy

6 Best Boat Deck Paint In 2023

Reviewed By Herb Benavent / Boating Editor

Best Boat Deck Paint Kit

KiwiGrip Non-Skid Deck System

Best large boat deck paint.

TotalBoat TotalTread Non-Skid

Best affordable boat deck paint.

Rust-Oleum Marine Topside

The top 6 boat deck paint in 2023.

• 1. KiwiGrip Non-Skid Deck System
• 2. TotalBoat TotalTread Non-Skid
• 3. Rust-Oleum Marine Topside
• 4. TUFF Coat UT-100 1 Gallon Non-Skid Coating
• 5. Durabak 18 Non-Slip Coating Deck Paint for Boats
• 6. Interlux Interdeck Slip-Resistant

If your boat deck started to fade and lose its grip, perhaps it’s time you repainted it and restored its former glory. More importantly, the best paint for the boat deck will also make your deck safer by adding a slip-resistant layer.

When choosing the right paint for your boat, you should think about a few things. The paint needs to be easy to apply, adhere well to the surface, resist weather conditions, and give you good traction whether it’s wet or dry.

In this article, we’re going to help you narrow down your choices. Our boat deck paint reviews will give you an insight into the best boat deck paints that will work fantastically on any deck surface. And, in the buying guide, you’ll learn about everything you should look for in high-quality paint.

Durable, eco-friendly, and easy to apply, Kiwi deck paint is one of the best all-around products that you’ll come across. It comes with a roller for faster application and, unlike most other products, even a single layer will provide good traction. Because of all this, it’s easy to see how the KiwiGrip paint got the top spot on the list.

With its water-based acrylic formula, KiwiGrip boat deck coating is great to work with. It comes as a one-party system, so you won’t have to mix anything. And, as we’ve mentioned, the formula is eco-friendly and contains no fillers, sand, or rubber flecks.

Application

To make your job easier, KiwiGrip includes a roller in the package that you can use to create both smooth and rough textures. A single layer will do a very decent job, and you’ll be able to cover about 20 square feet with a single liter. The material is spread out onto the deck and then the supplied roller “lifts” the top of it to create the perfect non-slip texture.

Performance and Looks

The performance is fantastic – it doesn’t slip and holds its own when exposed to saltwater and lots of sunlight. The KiwiGrip non-skid deck system is available in 5 stock colors and you can even add a tint if you want a custom one.

• Stand Out Features - Why We Love It
• KiwiGrip roller for easier application
• One-part system for convenient use
• Environmentally-friendly acrylic formula
• Adjustable texture (based on application technique)

Type: Water-based Acrylic Surfaces: Wood, Fiberglass, Epoxy, Concrete, Metal Volume: 1 or 4 liters Non-skid: Yes Coverage: 20 square feet per liter Curing time: 1h (touch), 24h (walk), 7 days (fully) Color(s): Black, Blue, Cream, Gray, White

Made using high-quality polyurethane, TotalBoat TotalTread marine deck paint promises excellent performance. It’s less abrasive than most similar products, adheres well, and doesn’t crack or peel in the sun, which is why we picked it as our favorite.

As we said, the formula is based on polyurethane that works equally well on fiberglass, wood, metal, and even previously painted surfaces. It’s even better in multiple layers, providing very reliable traction if you have two coatings.

The TotalTread boat floor paint is pre-mixed (easy to work with), and you can choose if you want to apply it with a brush or a roller. You’ll get detailed instructions on how to use it on different surfaces, and a single gallon can paint up to 300 square feet.

One of the best things about the TotalTread paint is its durability – it’s UV-resistant and perfectly safe to scrub without worrying about chipping or cracking. Lastly, you can get it in 4 basic colors that match most default deck colors.

• UV resistant formula won’t crack or peel in the sun
• Adheres well to almost any type of surface
• Easy to clean (safe for scrubbing)
• Large coverage with a single can

Type: Polyurethane Surfaces: Fiberglass, Wood, Metal, Previously Painted Surfaces Volume: 1 quart Non-skid: Yes Coverage: 250 to 300 square feet per gallon Curing time: 24h (walk), 2 weeks (fully) Color(s): Beige, Gray, Light Gray, White

If you’re looking for an affordable way to make your deck look new, Rust-Oleum marine topside paint is a perfect choice. It’s smooth, easy to use, and works equally well on metal, wood, or fiberglass. Because of this, it easily gives you the best value for your money.

The formula is oil-based, unlike all the other deck paints featured on this list. While it’s maybe less durable in harsh conditions, it’s probably the easiest to use. On top of this, it looks beautiful and elegant, with a smooth finish and great gloss retention. 

Due to its consistency, this sailboat deck paint can even be applied with a spray too (in addition to a brush). A single can cover up to 100 square feet, and the paint will be dry to the touch in an hour or two. It doesn’t contain any non-slip components, so this goes on the pretty parts of the deck that you want to make shine.

Made to the highest standards, Rust-Oleum fiberglass boat deck paint shields your deck from fading, abrasion, and any type of damage. You have 9 color options to choose from, so it’s easy to find the one you like.

• The oil-based formula for easier application
• Dries to the touch within 2 hours
• Retains gloss and color for a long time
• Abrasion-resistant with excellent durability

Type: Modified Alkyd Surfaces: Fiberglass, Wood, Metal Volume: 1 quart Non-skid: No Coverage: 100 square feet (per can) Curing time: 1 to 2 hours (touch) Color(s): 9 colors available

Best High Traction Boat Deck Paint

Tuff coat ut-100 1 gallon non-skid coating.

Thanks to its rubberized formula, TUFF Coat UT-100 deck paint gives you fantastic traction even on a completely wet deck. This non-skid paint for boats is tough, durable, and works great on decks, docks, and many other surfaces.

Tuff Coat pays a lot of attention to product safety, so this top-rated paint for the boat deck is completely non-hazardous. Like we’ve mentioned, it contains rubber particles that give it an edge over other products.

A detail we like about UT-100 paint is that you can apply it with a spray, brush, or a roller. It gives the best results when you apply two coats, and you’ll get about 45 square feet from one can.

The performance is impressive regardless of conditions – it won’t peel or crack regardless of the temperature or sun exposure. And, most importantly, it gives your feet a fantastic grip so you can move around freely.

• The rubberized formula prevents slipping
• Water-based and completely safe to use
• Highly resistant to UV rays and weather conditions
• Suitable for almost all types of surfaces

Type: Water-based Surfaces: Fiberglass, Concrete, Wood, Aluminum, Steel Volume: 1 gallon Non-skid: Yes Coverage: 40 to 45 square feet in two coats (per gallon) Curing time: 24h (touch), 5-7 days (fully) Color(s): 8 colors available

Best Boat Deck Paint For UV Protection

Durabak 18 non-slip coating deck paint for boats.

For ultimate deck customization, there’s no better choice than the Durabak non-slip deck paint. It’s available in sixteen great-looking colors that will make your deck look better than ever. The quality is on-point too, as it’s the paint of choice for many professionals and the US Navy.

Thanks to the recycled rubber tire granules, Durabak 18 guarantees impressive traction in both dry and wet conditions. The base is polyurethane that not only looks great but also provides great protection to the deck underneath.

You have three choices when applying the Durabak 18 paintbrush, spray, or the special Stipple Roller. The paint works well on fiberglass boats, concrete, wood, and metal, and even adheres well to itself (great for small reparations).

Durabak 18 paint is strong but flexible at the same time, so it maintains quality level over many years. Combine this with the numerous color options we mentioned, and you have a really solid choice when it’s time to repaint your boat.

• Textured for even greater slip-resistance
• A huge number of color options (sixteen)
• Suitable to use even in direct sunlight
• Bonds well to itself for easy reparations

Type: Polyurethane Surfaces: Concrete, Wood, Fiberglass, Metal, Coated Surfaces Volume: 1 gallon Non-skid: Yes Coverage: 60 square feet in two coats (per gallon) Color(s): 16 colors available

Best All Surface Boat Deck Paint

Interlux interdeck slip-resistant.

Versatility is the best thing about the Interlux Interdeck marine deck coating – it works equally well on all surfaces. On top of this, it doesn’t slip, prevents glare, and looks fantastic.

With an addition of a fine mineral additive that chemically bonds to the paint, Interlux non-skid deck paint has increased strength and durability. The base is polyurethane with all its well-known qualities (good adhesion and slip-prevention).

The texture of this paint is really fine, making the application much easier compared to most others. You can use it straight from the can (no mixing required), and all you need is a brush or a roller.

We particularly like that this is a low sheen paint, meaning that you won’t have any glare on the boat surface. Interlux Interdeck is available in 4 different colors, allowing you to give your deck the look you always wanted.

• Mineral additives significantly increase durability
• The low sheen finish helps prevent sunlight glare
• Looks great (no peels or cracks) for many years
• Great to use on any material, even painted surfaces

Type: Polyurethane Surfaces: Any Volume: 1 quart Non-skid: Yes Color(s): Gray, White, Cream, Sand Beige

How To Choose A Boat Deck Paint – Buying Guide

While it doesn’t have much to do with performance, color is very important for most of us. Simply put, we want the deck to look nice and blend in. As you’ve had the chance to see, most manufacturers offer paints in many beautiful colors so finding the one you like is easy. If you are deciding between a color and a white deck, ask yourself if you want to be able to walk barefoot on your boat. A white deck will stay cooler in the sun and not burn your feet like a dark deck on a hot day would. If you are planning on a color, also look into getting some really good boat shoes in our other list.

An important task for the paint is protecting the deck surface. This includes everything from foot traffic in your boat shoes to blocking out UV rays. With this in mind, look for tough but flexible paints that won’t peel or crack (especially if you’re not using a boat cover).

You might also like: Boat Polishes 

Water Resistance

Since a boat deck comes into contact with a lot of water, the paint needs to be water-resistant. Regular paint would quickly wash away, so we advise that you always buy specialized paint that can withstand weather conditions.

Non-Slip Coating

Providing good traction when walking is the most important job of your non-skid deck paint. Furthermore, it will make using accessories like deck chairs more enjoyable too. Regarding slip resistance, two things play a role – paint formula and texture.

The painting process isn’t particularly enjoyable, and most boat owners don’t want to do it every year. Paying attention to the aspects we mentioned will guarantee that the paint will last for many years. Good paints are water and slip-resistant, don’t peel or crack, and look fantastic even after many years.

Q: How Should I Prepare My Boat Before Painting?

Before you paint, make sure to remove all the imperfections from the surface (chips and peels). Afterward, degrease and clean the surface and let it dry. Doing this will make your painting job easier and make the result much better.

Q: What Other Accessories Will I Need Besides The Paint?

While most paints we featured are a one-party system, some paints require a primer to improve adhesiveness. Of course, you’ll also need a brush or roller to apply the paint. Lastly, you can use a boat polish to give your vessel some shine once the paint dries.

Q: How Long Does It Take For The Paint To Dry?

The paint should be dry to touch in around 1-2 hours, depending on the type of climate that you are in. However, it’s probably the best idea to avoid walking over it for 24 hours so you don’t ruin the coating.

Q: Can I Paint Over Gelcoat?

Yes, you can paint over gelcoat. If it’s not completely covered with large cracks, you can get fantastic results. However, it requires a bit more preparation that includes a thorough cleaning, using epoxy primer, and sanding the surface.

Q: How To Paint Fiberglass Boat Decks?

Painting fiberglass boat decks is fairly easy if you follow a few simple guidelines. Here’s what you should do:

• Clean the deck (remove debris, rinse with fresh water, leave to dry)
• Apply masking tape (mark the area that you want to paint)
• Paint the deck area
• Leave to dry (up to 7 days before you return elements).

Globo Surf Overview

Painting the deck is an important part of boat maintenance , even though you won’t do it often. Not only does it make your boat look like new, but it also gives you secure footing so you don’t slip. With the boat deck paints from our list, you’ll get that extra safety and enjoy a great-looking deck each time you set out.

More Boating Detailing  Reviews:

•   Boat Buffers  
•   Boat Waxes

More Paint Reviews:

• Pool Deck Paint

Practical Boat Owner

• Digital edition

Deck paints on test

• November 27, 2014

PBO tested deck paints and some DIY alternatives to see which offers the best grip -here are the results of our season's tests

With most paint finishes on boats we spend hours striving for a blemish-free, mirror-like surface that reflects the (hopefully) sunlit water with perfect clarity – until, that is, we need to stand on it.

I’ve been on some boats, both new and old, where the builders have omitted to add a non-slip surface to some parts of the deck – and those areas have been lethal when wet. That’s where deck paint steps in. Most paint manufacturers make it, or alternatively there are several home-grown recipes or domestic paints whose proponents swear are the best solutions to the problem. A common feature is that they are all single-pack paints, which keeps the cost down compared with two-pack finishes and makes them easier to patch, overpaint or renew.

What we tested – and how

Our viewing ramp for the PBO Project Boat at the Beaulieu BoatJumble doubled up as a test ramp for non-slip deck paints

We gathered together six finishes, some proprietary and some home-grown. Where the non-slip finish was created by adding another component to a standard marine gloss paint we used International Toplac as the base – a single-pack paint we had used to good effect on the PBO Project Boat and of which we had some remaining. One of the paints, Kiwigrip, could be applied in two different ways to give different levels of grip, so we ultimately had seven finishes to test.

We began this test just before Beaulieu Boatjumble in April this year, which gave us a unique opportunity to get a lot of feet to walk across the paint in a short time: we applied the paints in horizontal strips up the viewing ramp we built to allow visitors to look inside our project boat, Hantu Biru.

With more than 7,000 visitors to the boatjumble, many of whom climbed our ramp, PBO readers’ feet must have caused more traffic in a day than many boat decks would experience in a year or more.

Since Beaulieu, the test board has been outside the PBO offices in Poole, experiencing summer sunshine, torrential rain and the combined wear of the feet of the PBO and Amateur Gardening magazine staff – including some tyre marks where someone accidentally drove over it.

Each paint tested had two coats applied, with the underlying substrate being 18mm WBP plywood primed with Sandtex High Performance Primer Undercoat. At the end of the test there was no sign of any of the paints losing adhesion. We tested this by scrubbing each paint firmly using a scrubbing brush and detergent, also noting how easy they were to clean.

Hempel Non-Slip Deck Coating after scrubbing

International Interdeck deck paint after scrubbing

You need a special ‘loopy-goopy’ roller to apply Kiwigrip and get an appropriately textured surface

Rough-textured Kiwigrip after scrubbing

Smooth-textured Kiwigrip after scrubbing

This stuff is designed to be applied to brickwork, render and all sorts of inhospitable surfaces, so it stands a pretty good chance of sticking to your deck. The texture comes from sand that’s mixed in with the paint, helping it to fill gaps in cement – or offer a grippy surface for deck shoes. There’s no mystery to applying it – just slap it on to whatever thickness you like using a brush or roller. The tricky bit, we found, was to get the sand to distribute evenly across the finish. However much you stir the paint, the sand tends to clump – not a problem on brickwork, but less good on your deck. However, with careful brushwork an acceptable finish can be achieved. Sandtex proved durable throughout the test, with no signs of losing the non-slip surface. It was grippy and effective both in wet and dry conditions. However, it proved difficult to clean, retaining the staining left by muddy, grassy feet at Beaulieu and from subsequent foot traffic.

Sandtex retainedd some dirt after scrubbing

Boat enamel and sugar Price: £30/litre

This is the only home-brew non-slip which bears any relation to the Kiwigrip, in that the grip comes from the finished texture of the paint itself rather than from an additive. We made the surface by applying a generous coat of Toplac, then immediately covering it to a depth of about 2mm with sugar. Once the paint had dried we dissolved away the sugar with boiling water, leaving the texture behind. We then applied another coat, but it shouldn’t be necessary, as the paint tends to fill the texture left by the first coat.

The non-slip surface is very good, with plenty of grip in all conditions, and despite the fact that Toplac is not designed for this application, it does not seem to have worn over the course of the season.

The problem is the aesthetics – the finely hollowed surface seems to trap dirt. We found it impossible to get clean, and hence would not recommend it. However, as a means of adding texture to varnish it could work well.

Sugar-coated Toplac remained dirty despite scrubbing – but it’s a great way to add texture to varnishwork

Boat enamel and sand Price: £30/litre

Mixing in an additive is the easiest way to achieve a non-slip which matches the surrounding paintwork, as you can use the same paint. We used standard builders’ sand, which we spread out and dried in the sun to remove any moisture – a bag of kiln-dried sand might save that bother.

Instead of mixing the sand with the paint, which would have given us similar issues with achieving an even coverage as experienced with Sandtex, we applied a generous coat of Toplac with a brush before sieving the sand over the top. When the paint was dry we brushed off the excess sand and overcoated with another coat of Toplac.

The resulting surface is very grippy – better than the Sandtex owing to the higher sand concentration – and has so far proved durable. It performs well both in the wet and the dry but suffers from the same problem as the Sandtex in that it stains, so it cannot easily be restored to the original colour.

Sand added to Toplac provided the best grip, but was hard to clean. Another coat of enamel over the top would help keep it clean while not reducing the non-slip properties too much

PBO Verdict

The good news is that they all worked. The best non-slip surface was actually the DIY sand, with sugar running a close second. I wouldn’t choose them personally as they retained the dirt and would make your boat look scruffy very quickly, but that might change if with a different base paint or colour.

Next best for non-slip was the Kiwigrip rough finish which, combined with easy cleaning, wins it our best buy award. However, Sandtex is a close second on non-slip characteristics and is a fraction of the price, so if you’re prepared to forgo aesthetics or choose a darker colour, it’s a good option. The Hempel and International deck paints were on a par, with similar non-slip characteristics and returning to a similar level of cleanliness. They have the advantage of easy application, and occupy a middle ground on the price.

Our test ramp following a season’s heavy use

Other PBO tests that might interest you:

14 iPad and Android navigation apps tested

Gear test following an explosion in the number of marine navigation apps available for iPad and Android devices in the…

The best dehumidifiers tested

Keeping dampness at bay from boat interiors is an ongoing battle: Alex Bell assesses nine dehumidifiers for efficiency, power consumption…

Dripless shaft seals – PBO Buyer’s Guide

The once-ubiquitous stuffing-box stern gland still has much in its favour – it’s simple, tried-and-tested and easy to repair and…

How to make your jacket waterproof again – 7 products tested

PBO tests reproofing products

You are using an outdated browser. Please upgrade your browser to improve your experience.

Non-Slip Deck Paints & Bilge Paints

Anti-Osomosis Treatments  |  Deck & Bilge Paints  |  Glosses & Topcoats  |  Paint Strippers  |  Primers & Undercoats  |  Thinners | Varnishes

We sell a great selection of Deck Paints and Bilge & Locker Paints.

Boat deck paints are specifically designed to be used on the upper decks of boats. They must also be able to withstand the harsh marine environment. This includes exposure to saltwater, sunlight, and abrasion.

A lot of deck paints are sold as non slip deck paints, offering high levels of grip and providing an anti slip surface. This is particularly useful in areas where people would be moving about on the topsides of the boat.

Bilge and locker paints, on the other hand, are designed to be used in the lower, enclosed parts of a boat. They have a high water and oil resistance as well as being resistant to chemicals and mildew.

Bilge paints are formulated to protect against the effects of water and moisture, which can cause rust and corrosion. Thanks to their great resistance to oils, salt water, grease and general grime in and around your lockers, these paint finishes are easy to clean and maintain.

Take a look at our selection of  Paint Brushes & Rollers  - providing you the tools to get the best finish.

• International
• Deck & Bilge Paints
• Glosses & Topcoats
• Maintenance
• Maintenance & Repair
• Paint & Varnish
• Painting & Varnishing Tools
• Rollers & Trays
• £6.00 - £36.00
• £36.00 - £66.00
• £66.00 - £96.00
• £96.00 - £126.00
• £126.00 - £156.00
• £156.00 - £210.00

• International Marine Coatings
• International Protective Coatings

Above the waterline

Below the waterline

Wood varnishing

Supplements & tools

Care and maintenance.

Clean, restore, protect, and maintain your boat’s surfaces.

Fillers and Epoxy

For fairing, filling scratches/holes and boat-building repairs.

Fouling Control

Protection from fouling such as barnacles, weeds and slime. Includes antifouling products.

Seals and protects bare substrates above and below the waterline.

Products to ease boat paint application and/or clean equipment.

Topcoat Finishes

Hull, deck, interior and bilge coatings for protection and aesthetics

Base for topcoat finishes.

Stunning, durable boat and yacht varnish finishes and natural-looking tints.

Paint your boat like a pro

Find the best products to keep your boat in great condition

Get all the support you need to paint with confidence

Benefit from our continuous innovation and scientific expertise

Select your country

Our products and guidelines are customised for each country. Please select yours below.

• Canada Canada
• United States United States

Asia Pacific

• Australia Australia
• New Zealand New Zealand
• Singapore Singapore

• België Belgium
• Hrvatska Croatia
• Danmark Denmark
• Suomi Finland
• France France
• Deutschland Germany
• Ελλάδα Greece
• Ireland Ireland
• Italia Italy
• Nederland Netherlands
• Norge Norway
• Portugal Portugal
• España Spain
• Sverige Sweden
• United Kingdom United Kingdom

Middle East & Africa

• South Africa South Africa
• Türkiye Turkey

Who's painting?

Choose one of the following to tailor the site to your needs.

• Tools & Home Improvement
• Paint, Wall Treatments & Supplies
• Paint & Primer
• Interior & Exterior House Paint

Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime Try Prime and start saving today with fast, free delivery

Amazon Prime includes:

Fast, FREE Delivery is available to Prime members. To join, select "Try Amazon Prime and start saving today with Fast, FREE Delivery" below the Add to Cart button.

• Cardmembers earn 5% Back at Amazon.com with a Prime Credit Card.
• Unlimited Free Two-Day Delivery
• Streaming of thousands of movies and TV shows with limited ads on Prime Video.
• A Kindle book to borrow for free each month - with no due dates
• Listen to over 2 million songs and hundreds of playlists
• Unlimited photo storage with anywhere access

Important:  Your credit card will NOT be charged when you start your free trial or if you cancel during the trial period. If you're happy with Amazon Prime, do nothing. At the end of the free trial, your membership will automatically upgrade to a monthly membership.

One-time purchase: #buybox .a-accordion .a-accordion-active .a-price[data-a-size=l].reinventPriceAccordionT2 .a-price-whole { font-size: 28px !important; } #buybox .a-accordion .a-accordion-active .a-price[data-a-size=l].reinventPriceAccordionT2 .a-price-fraction, #buybox .a-accordion .a-accordion-active .a-price[data-a-size=l].reinventPriceAccordionT2 .a-price-symbol { top: -0.75em; font-size: 13px; } $27.98 $ 27 . 98 $0.87 per Fl Oz ( $0.87 $0.87 / Fl Oz) FREE delivery Friday, August 30 on orders shipped by Amazon over $35 Ships from: Amazon.com Sold by: Amazon.com

Choose how often it's delivered, skip or cancel any time, unlock 5% savings, added to cart, image unavailable.

• To view this video download Flash Player

Rust-Oleum 206999 Marine Topside Enamel Paint, Gloss White, 1-Quart, 32 Fl Oz (Pack of 1)

1 Quart (Pack of 1)

1 Quart (Pack of 4)

32 Fl Oz (Pack of 2)

Purchase options and add-ons

Brand	Rust-Oleum
Color	White
Finish Type	Gloss
Size	1 Quart (Pack of 1)
Item Volume	1 Quarts
Special Feature	UV Resistant
Unit Count	32.0 Fl Oz
Paint Type	Spray
Specific Uses For Product	Interior/Exterior
Surface Recommendation	Fiberglass, Wood, Metal

About this item

• Ideal for use on fiberglass, wood or metal surfaces above the waterline
• Oil-based formula is flexible and applies easily with excellent leveling
• Dries to the touch in as little as 1 to 2 hours and covers up to 100 sq ft
• Durable coating resists abrasion and extreme weather conditions and provides long-lasting UV protection
• Superior gloss retention and smooth finish help maintain the beauty and elegance of your surfaces
• UV resistant
• Excellent gloss retention
• Resists abrasions
• Formulated for brush and spray application

Frequently bought together

Similar items that may deliver to you quickly

From the manufacturer

Trusted to protect valuable marine surfaces since 1921

Did you know...?

Rust-Oleum was founded by sea captain Robert Fergusson after he notice that some spilled fish oil prevented his ship from rusting.

His drive and innovation to protect his vessel from harsh condition still drives the company today. The full line of Rust-Oleum Marine Coatings offer unparalleled performance that hold up under everyday wear and environmental factors while remaining stylish.

RUST-OLEUM MARINE COATINGS

Offering solutions from bow to stern.

A boat is a big investment - one that deserves the highest quality protection available while not compromising on appearance. Rust-Oleum offers a full line of marine coatings to keep ships looking and performing at their peak for enhanced longevity and fewer repairs. Formulated to work in both fresh and salt water settings, these paints, primers and additives work hard to keep maintaining your vessel easier than ever.

• Protect from UV damage
• Resist salt, moisture and mildew
• Prevention corrosion
• Keep undersides algae and barnacle free
• Prime difficult or critical surfaces prior to painting
• Add an anti-slip grip to coatings for safety
• ...and much more!

SPECIALIZED TO STAND UP TO THE ELEMENTS

Thick yet flexible paint formula adds brilliant color that withstands extreme weather conditions. Offers exceptional gloss retention that resists fading even with daily sun exposure.	Provides exceptional shine with ultimate resistance to common damaging elements. Specially created to expand and contract with changing temperatures.	Use below the waterline in both fresh and salt water bodies of water to prevent buildup of marine growth on the bottom of the boat. Designed to slowly release copper for superior fouling protection.	Ultra-fine ground pumice base can be mixed into any latex or oil-based paints to add grip to surfaces. Its addition will not affect the durability or appearance of coating.

FULL BOAT PROTECTION

Maintaining Your Vessel Both Above and Below the Waterline

Find the right solution for every surface, including:

• Previously Painted Wood
• Lightly Rusted Metal

Customer Reviews
Price	$19.34$19.34	$63.98$63.98	$19.98$19.98	$26.89$26.89	$49.62$49.62	$12.89$12.89
Use Above the Waterline:	✓		✓	✓	✓	✓
Use Below the Waterline:		✓
Surfaces:	Wood, Metal, Fiberglass	Previous Hard Coatings, Fiberglass Boats with Outboards/ Outdrives	Interior and Exterior Wood	Bare, Painted or Lightly Rusted Metals	Fiberglass, Wood, Previously Painted Surfaces	Wood, Metal, Fiberglass, Concrete
Protects Against:	UV Damage, Weathering, Abrasion	Barnacles, Algae, Other Marine Growth	UV Damage, Water, Sea Spray, Chemicals	Corrosion, Peeling, Cracking	Corrosion, Peeling, Cracking	Slippage on Wet Surfaces
Dries to the Touch In:	1-2 Hours	4 Hours	2 Hours	1-2 Hours	1 Hour	Same as Paint Added To
Full Cure In:	3 Days	16 Hours	3 Days	1 Day	3 Days	Same as Paint Added To
Coverage:	100 Sq. Ft. Per Quart	110 Sq. Ft. Per Quart	75-150 Sq. Ft. Per Quart	100 Sq. Ft. Per Quart	100 Sq. Ft. Per Quart	Same as Paint Added To

Looking for specific info?

Videos for this product.

Click to play video

Rust-oleum Paint on Tub/Shower Review

MarianneSaid

Our Point of View on Rust-Oleum Topside Paint

WTI | We Tried It!

How I Use This Rustoleum Topside Paint

DIY Power Couple

Transforming our bath/shower with paint #DIYhomeimprovement

Preserve your Topsides Paint leftovers during storage. ZERO out your waste.

STIX bonding primer amazon review

360 Degree View

Amazon Product Imaging

Customer Review: Gloss white Boat paint

Smells Amazing !! Love this scent !!

Customer Review: Super strong smell!

Save your leftover paint and never waste any! This works!

Product information, technical details.

Brand	‎Rust-Oleum
Color	‎White
Finish Type	‎Gloss
Size	‎1 Quart (Pack of 1)
Item Volume	‎1 Quarts
Special Feature	‎UV Resistant
Unit Count	‎32.0 Fl Oz
Paint Type	‎Spray
Specific Uses For Product	‎Interior/Exterior
Surface Recommendation	‎Fiberglass, Wood, Metal
Item Form	‎Liquid
Included Components	‎Topside Paint
Age Range (Description)	‎Adult
Model Name	‎Rust-Oleum 206999 Marine Topside Paint, Gloss White, 1-Quart
Package Information	‎Can
Color Code	‎000000
Full Cure Time	‎2 Hours
Coverage	‎see package
UPC	‎020066118860
Global Trade Identification Number	‎00020066118860
Manufacturer	‎Rust-Oleum
Part Number	‎206999
Item Weight	‎2 pounds
Product Dimensions	‎5 x 5 x 5 inches
Country of Origin	‎USA
Item model number	‎206999
Is Discontinued By Manufacturer	‎No
Style	‎Marine Topside Enamel Paint
Finish	‎Gloss
Material	‎Plastic
Shape	‎Triangle
Item Package Quantity	‎1
Special Features	‎UV Resistant
Batteries Included?	‎No
Batteries Required?	‎No
Warranty Description	‎Warranty

Additional Information

ASIN	B000BZTJT2
Customer Reviews	4.6 out of 5 stars
Best Sellers Rank	#3,500 in Tools & Home Improvement ( ) #11 in
Date First Available	August 17, 2005

Warranty & Support

Amazon.com Return Policy: You can return many items you have purchased within 30 days following delivery of the item to you. Our Voluntary 30-Day Return Guarantee does not affect your legal right of withdrawal in any way. You can find out more about the exceptions and conditions .

Fields with an asterisk * are required

: : : Enter the store name where you found this product : Please select province : to provide feedback. \n' + ' ' ); } function getThankYouDiv(thankMsg) { return ( ' \n' + '

' ); } function getLoadingGifDiv() { return '

Product Description

Rust-Oleum Marine Coatings Topside Paint provides long-lasting protection and a brilliant finish on fiberglass, wood or metal that is above the waterline. It is made from a modified alkyd which allows for a flexible coating that is durable in extreme weather conditions and resistant to cracking, chipping and peeling. Excellent color retention and UV protection make it perfect for use on small pleasure crafts including speedboats, sailboats and fishing boats.

From the Manufacturer

Rust-Oleum Marine Topside Paint provides long-lasting protection and a brilliant finish to fiberglass, wood or metal that is above the waterline. It is made from a modified alkyd and is durable in extreme weather conditions.

Product guides and documents

Top brand: rust-oleum, compare with similar items.

	206999 Marine Topside Enamel Paint, Gloss White, 1-Quart, 32 Fl Oz (Pack of 1)	206999-4PK Marine Topside Paint, 4 Pack, White	Commercial Grade Topside Paint Semi-Gloss White Quart	207000-4PK Marine Topside Paint, 4 Pack, Semi-Gloss White	Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Classic Whaler Blue, Gallon), 1 Gallon (Pack of 1)	-488366 TotalBilge Epoxy Based Bilge Paint for Boat Bilges, Bulkheads, Engine Rooms and Locker Areas (White, Gallon), 1 Gallon (Pack of 1)
Price	$27.98$27.98	-14% $96.81$96.81 List: $111.96	$27.91$27.91	-10% $100.37$100.37 List: $111.96	$124.00$124.00	$99.99$99.99
Delivery
Customer Ratings	6,731	6,731	6	6,731	2,510	902
Sold By
volume
unit count
paint type
surface suggestion
exterior finish
full cure time

Customer reviews

• 5 star 4 star 3 star 2 star 1 star 5 star 79% 12% 4% 1% 4% 79%
• 5 star 4 star 3 star 2 star 1 star 4 star 79% 12% 4% 1% 4% 12%
• 5 star 4 star 3 star 2 star 1 star 3 star 79% 12% 4% 1% 4% 4%
• 5 star 4 star 3 star 2 star 1 star 2 star 79% 12% 4% 1% 4% 1%
• 5 star 4 star 3 star 2 star 1 star 1 star 79% 12% 4% 1% 4% 4%

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.

Customers say

Customers like the quality, performance, ease of application, durability, and value of the paint. For example, they mention that it works well, it looks brand new and that it's easy to work with. Some appreciate the value for money, saying it'll last a long time. That said, some complain about scratch resistance and disagree on color, and drying time.

AI-generated from the text of customer reviews

Customers are satisfied with the quality of the paint. They mention that it has a glossy, gorgeous finish, and is easy to apply. Some customers also say that the paint makes the tank look like new. They say it's great for fiberglass boats and the inside of a sail boat.

"...And it is high gloss. We’ll see how it holds up over time but it looks great and a heck of a lot cheaper than a tile job. One caution...." Read more

"...Quality and FinishThe paint quality is exceptional . It provides a smooth, glossy finish that looks professional and high-end...." Read more

"...Did a great job. Bathtub looks brand new . Must use in well ventilated area." Read more

" Great paint for inside of our sail boat . It was easy to apply and easy to use . I will say the paint dried quick and has a great sheen...." Read more

Customers are satisfied with the performance of the paint. They say it works well, produces good results, and is useable. Some customers also mention that it works amazing on a diving board and a garage door. Overall, customers are happy with the product's performance.

"...bigger(regular diameter but 4” wide) it held a lot more paint and worked great ...." Read more

"... Did a great job . Bathtub looks brand new. Must use in well ventilated area." Read more

"...I painted the filter cover and it turned out great . It is smooth and I don't feel the fiberglass in my hands anymore. Really great paint...." Read more

"This was an amazing product . It went in easily and dried quickly. Made our 20 year old pool edges look brand new...." Read more

Customers find the paint easy to apply. They say it goes on smoothly with a small roller and dries quickly. They also say good prep is key and that it lays down really easily with the roller tip method.

"...Applying the paint was straightforward and hassle-free. It goes on evenly and dries relatively quickly, allowing for a seamless painting process...." Read more

"Great paint for inside of our sail boat . It was easy to apply and easy to use . I will say the paint dried quick and has a great sheen...." Read more

"This was an amazing product. It went in easily and dried quickly. Made our 20 year old pool edges look brand new...." Read more

"...With that said, the product applied very easily ...." Read more

Customers are satisfied with the durability of the paint. They mention that it is scratch resistant, and is great for protecting high use areas like boat decks.

"...Overall, nice paint. It seems durable and we’ll see how ot works in a bathroom. I also painted the ceramic towel bar fixtures...." Read more

"...providing excellent resistance to water, UV rays, and general wear and tear . We used this for our trailer and it looks fantastic...." Read more

"...I use this on my outdoor furniture! We used it on the boat! I love the durability and its easy to clean! What more could I ask for!" Read more

"...The red is super glossy too and seems to be holding up well (it's only been on the trailer for 2 months though)...." Read more

Customers like the value of the paint. They say it's well worth the cost, much cheaper than most marine paints, and saves them money. Some say the quality and price is excellent.

"...We’ll see how it holds up over time but it looks great and a heck of a lot cheaper than a tile job. One caution...." Read more

"...It provides a smooth, glossy finish that looks professional and high-end ...." Read more

"...I recommend for a bandaid upgrade that's affordable . Satisfied...." Read more

"...I am so pleased with the results. Well worth the money ." Read more

Customers are mixed about the color of the paint. Some mention that it's beautiful white, shiny, and goes on like a dream. The color match was great on a Parker boat, while others say that the color was very stark, and it dried like orange peel. Some say that it looks very light grey after two coats, and that the Navy blue does not look Navy.

"...The navy blue color is rich and vibrant, giving a sleek and polished appearance to the surface.Application..." Read more

"...What I didn’t realize was that the color all over had been slowly washing out , because when I started touching up where the shampoo bottles were, I..." Read more

"...Perfect amount and the color is spot on ." Read more

"...Made our 20 year old pool edges look brand new. The color was crisp and very bright. I am so pleased with the results. Well worth the money." Read more

Customers are mixed about the drying time of the paint. Some mention that it dries rather quickly, while others say that it doesn't dry hard and takes a long time to dry. Some say that the paint has a great sheen and drier than other paints.

"...It goes on evenly and dries relatively quickly , allowing for a seamless painting process...." Read more

"...tried a brush and was very streaky . Second coat not needed. Color was a little lighter than expected, wanted a brown and this was a light tan...." Read more

"...It was easy to apply and easy to use . I will say the paint dried quick and has a great sheen...." Read more

"...The white also looked matte and not as glossy as the blue ...." Read more

Customers are dissatisfied with the scratch resistance of the paint. They mention that it chips off easily if dinged, and is not as durable as two-part paint. It also takes too long to dry and is easily scratched.

"...Originally, I had issues with cratering when applying this paint and I was a bit hesitant to use it...." Read more

"...Overall we are happy with the performance. Downsides....it chips off easily if dinged (which does make me a little worried about the boat trailer)...." Read more

"...The "tub and tile" also made by Rustoleum is not a great or long lasting - it's also hard to find, and it's expensive...." Read more

"...The fiberglass on either side gets beaten up . I decided to paint it. The fiberglass is an off white...." Read more

Reviews with images

• Sort reviews by Top reviews Most recent Top reviews

Top reviews from the United States

There was a problem filtering reviews right now. please try again later..

Top reviews from other countries

• Amazon Newsletter
• About Amazon
• Accessibility
• Sustainability
• Press Center
• Investor Relations
• Amazon Devices
• Amazon Science
• Sell on Amazon
• Sell apps on Amazon
• Supply to Amazon
• Protect & Build Your Brand
• Become an Affiliate
• Become a Delivery Driver
• Start a Package Delivery Business
• Advertise Your Products
• Self-Publish with Us
• Become an Amazon Hub Partner
• › See More Ways to Make Money
• Amazon Visa
• Amazon Store Card
• Amazon Secured Card
• Amazon Business Card
• Shop with Points
• Credit Card Marketplace
• Reload Your Balance
• Amazon Currency Converter
• Your Account
• Your Orders
• Shipping Rates & Policies
• Amazon Prime
• Returns & Replacements
• Manage Your Content and Devices
• Recalls and Product Safety Alerts
• Registry & Gift List

• Conditions of Use
• Privacy Notice
• Consumer Health Data Privacy Disclosure
• Your Ads Privacy Choices