Sailboat specifications
- Last update: 13rd March 2020
J/80's main features
J/80's main dimensions, j/80's rig and sails, j/80's performances, j/80's auxiliary engine, j/80's accommodations and layout.
Similar sailboats that may interest you:
Great choice! Your favorites are temporarily saved for this session. Sign in to save them permanently, access them on any device, and receive relevant alerts.
- Sailboat Guide
J/80 is a 26 ′ 2 ″ / 8 m monohull sailboat designed by Rod Johnstone and built by J Boats and Waterline Systems, LLC starting in 1992.
- 2 / 4 Long Beach, CA, US 1999 J/80 $27,500 USD View
- 3 / 4 Long Beach, CA, US 1999 J/80 $27,500 USD View
- 4 / 4 Long Beach, CA, US 1999 J/80 $27,500 USD View
Rig and Sails
Auxilary power, accomodations, calculations.
The theoretical maximum speed that a displacement hull can move efficiently through the water is determined by it's waterline length and displacement. It may be unable to reach this speed if the boat is underpowered or heavily loaded, though it may exceed this speed given enough power. Read more.
Classic hull speed formula:
Hull Speed = 1.34 x √LWL
Max Speed/Length ratio = 8.26 ÷ Displacement/Length ratio .311 Hull Speed = Max Speed/Length ratio x √LWL
Sail Area / Displacement Ratio
A measure of the power of the sails relative to the weight of the boat. The higher the number, the higher the performance, but the harder the boat will be to handle. This ratio is a "non-dimensional" value that facilitates comparisons between boats of different types and sizes. Read more.
SA/D = SA ÷ (D ÷ 64) 2/3
- SA : Sail area in square feet, derived by adding the mainsail area to 100% of the foretriangle area (the lateral area above the deck between the mast and the forestay).
- D : Displacement in pounds.
Ballast / Displacement Ratio
A measure of the stability of a boat's hull that suggests how well a monohull will stand up to its sails. The ballast displacement ratio indicates how much of the weight of a boat is placed for maximum stability against capsizing and is an indicator of stiffness and resistance to capsize.
Ballast / Displacement * 100
Displacement / Length Ratio
A measure of the weight of the boat relative to it's length at the waterline. The higher a boat’s D/L ratio, the more easily it will carry a load and the more comfortable its motion will be. The lower a boat's ratio is, the less power it takes to drive the boat to its nominal hull speed or beyond. Read more.
D/L = (D ÷ 2240) ÷ (0.01 x LWL)³
- D: Displacement of the boat in pounds.
- LWL: Waterline length in feet
Comfort Ratio
This ratio assess how quickly and abruptly a boat’s hull reacts to waves in a significant seaway, these being the elements of a boat’s motion most likely to cause seasickness. Read more.
Comfort ratio = D ÷ (.65 x (.7 LWL + .3 LOA) x Beam 1.33 )
- D: Displacement of the boat in pounds
- LOA: Length overall in feet
- Beam: Width of boat at the widest point in feet
Capsize Screening Formula
This formula attempts to indicate whether a given boat might be too wide and light to readily right itself after being overturned in extreme conditions. Read more.
CSV = Beam ÷ ³√(D / 64)
Embed this page on your own website by copying and pasting this code.
- About Sailboat Guide
©2024 Sea Time Tech, LLC
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
- New Sailboats
- Sailboats 21-30ft
- Sailboats 31-35ft
- Sailboats 36-40ft
- Sailboats Over 40ft
- Sailboats Under 21feet
- used_sailboats
- Apps and Computer Programs
- Communications
- Fishfinders
- Handheld Electronics
- Plotters MFDS Rradar
- Wind, Speed & Depth Instruments
- Anchoring Mooring
- Running Rigging
- Sails Canvas
- Standing Rigging
- Diesel Engines
- Off Grid Energy
- Cleaning Waxing
- DIY Projects
- Repair, Tools & Materials
- Spare Parts
- Tools & Gadgets
- Cabin Comfort
- Ventilation
- Footwear Apparel
- Foul Weather Gear
- Mailport & PS Advisor
- Inside Practical Sailor Blog
- Activate My Web Access
- Reset Password
- Customer Service
- Free Newsletter
Ericson 41 Used Boat Review
Mason 33 Used Boat Review
Beneteau 311, Catalina 310 and Hunter 326 Used Boat Comparison
Maine Cat 41 Used Boat Review
Tips From A First “Sail” on the ICW
Tillerpilot Tips and Safety Cautions
Best Crimpers and Strippers for Fixing Marine Electrical Connectors
Thinking Through a Solar Power Installation
Getting the Most Out of Older Sails
How (Not) to Tie Your Boat to a Dock
Stopping Mainsheet Twist
Working with High-Tech Ropes
Fuel Lift Pump: Easy DIY Diesel Fuel System Diagnostic and Repair
Ensuring Safe Shorepower
Sinking? Check Your Stuffing Box
The Rain Catcher’s Guide
Boat Repairs for the Technically Illiterate
Boat Maintenance for the Technically Illiterate: Part 1
Whats the Best Way to Restore Clear Plastic Windows?
Mastering Precision Drilling: How to Use Drill Guides
Giving Bugs the Big Goodbye
Galley Gadgets for the Cruising Sailor
Those Extras you Don’t Need But Love to Have
UV Clothing: Is It Worth the Hype?
Preparing Yourself for Solo Sailing
How to Select Crew for a Passage or Delivery
Preparing A Boat to Sail Solo
On Watch: This 60-Year-Old Hinckley Pilot 35 is Also a Working…
On Watch: America’s Cup
On Watch: All Eyes on Europe Sail Racing
Dear Readers
Chafe Protection for Dock Lines
- Sailboat Reviews
Looking for a fast sprit boat? The J/80 cant keep up with a Melges 24, but we think for racing and family fun, its a more well rounded boat. And its less expensive.
We imagine Rod and Bob Johnstone of J/ Boats faced a dilemma back in 1991 when they prepared to introduce a new line of boats. Among the several boats they were building at that time was the J/35, one of the most popular and successful boats on the racing scene.
The J/105 would be the first production keel boat rigged with a retractable bowsprit, conceived to in- crease performance by offering cruisers a user-friendly method of flying asymmetrical spinnakers. It, too, would measure almost 35 feet. So to give it a separate identity, they chose a metric name, vogue in the 1990s (10.5 meters equals 34.49).
Five years after introduction of the J/105, the company has sold more than 400 sprit boats in sizes ranging from 26-50 feet, and several look-alikes have been introduced by competitors. New cruising boats are being offered with optional bowsprit arrangements; one line even has an articulating bowsprit. Theres no doubt: The concept has spawned a generation of so-called sport boats like the Ultimate 20 (October 15, 1995) and the Melges 24 (May 1, 1995), both sprightly, trailerable pocket rockets.
The history of J/Boats dates to 1976, when Rod John- stone designed the groundbreaking J/24, a fast, easy- to-sail racer that attracted sailors frustrated with the vagaries of MORC and PHRF handicapping systems. Rod formed the company with brother Bob, who came aboard to handle marketing. They hired Everett Pearson of Tillotson-Pearson, now TPI Composites, to construct the boats. In the ensuing 20 years, more than 5,200 J/24s were produced, and the fleet became the second largest one-design keel boat class in the world, behind the Star class. By the early 1990s, the company was a fixture in the boatbuilding business.
Following the successful launch of the J/105, the company unveiled the J/80, which is carving a niche in the marketplace with a broad customer base. Measuring 26 3, it is a versatile performer designed to have market appeal among those entering the performance arena for the first time, dinghy sailors stepping up to a keel boat, big boat racers seeking a simpler method of going around the buoys, and daysailors.
At a glance, the boats low profile and soft chine are aesthetically appealing. A spacious 12 cockpit offers plenty of room for a four-person race crew, and its decks are uncluttered by ankle-knocking hardware. More than 170 boats have been built since hull #1 was launched in April, 1993.
Construction
During his four decades of boatbuilding, Everett Pear- son has constructed more than 16,000 fiberglass hulls. The J/Boats are constructed at TPIs plant using the Seeman Composites Resin Infusion Molding Process (SCRIMP), a vacuum-assisted closed system designed to increase the integrity of hulls while reducing the amount of volatile organic compounds that enter the environment and workplace. The system has also been employed in the construction of 65 blades for wind machines, and in fabricating therapy pools (SwimEx) used by professional football teams.
The SCRIMP method was developed by Bill See- man, a Gulf Coast fiberglass expert, who worked with Baltek, a manufacturer of end-grain balsa used as core material in hulls and decks. During the 1980s, at the same time Seeman was exploring new methods of laminating composite panels, Baltek was experi- menting with various methods of developing a core product engineered for vacuum-bagging.
When Seeman was commissioned by the U.S. Navy in 1990 to fabricate balsa-cored panels for a special project, he selected Balteks AL600 as the core because it contained a newly developed precoated copolymer that acted as a tie coat, strengthening the interlaminary bonds while reducing the amount of resin required. Baltek engineers continued to tinker with chemical formulations, eventually introducing the current generation of pre-coated balsa, AL600/10, which reduced cost of the balsa by a third. It is a key component in the SCRIMP process.
Coincidentally, Pearson was on a parallel track, pursuing attempts to develop a similar system when he discovered Seemans. During a visit to Seemans plant in Mississippi he was so was so taken with the process that he immediately purchased manufacturing rights and began building SCRIMPed boats, including the line of J/Boats. That was 1993.
Alan Johnstone of J/Boats sees several additional advantages to the new system.
It produces laminates with glass/resin ratios that are within one percent of specifications, he says. It also reduces labor cost because of increased efficiency in the lay-up process, and we think it produces a better product because workers are not working in a hazardous, smelly environment.
The J/80 hulls are cored with 3/8 AL600 over which are laid layers of fiberglass chop and bi-directional and unidirectional mat. Three-ounce mat is used to reinforce the keel sump, and 6 wide strips of 3/4-ounce mat are used to reinforce deck flanges. The use of vinylester resin has inspired the company to offer a 10-year blister warranty.
Bulkheads are located amidships, and in the bow and stern. Like deck flanges, they are tabbed to the hull with additional 6-wide overlays of cloth. The hull-deck joint is bonded with Plexus, a high strength adhesive Johnstone says is stronger than the laminate itself. The company says it has no reported hull-deck leaks since it began using Plexus. (We do know of one Lagoon catamaran that sprung a hull-deck leak, not because the adhesive failed, but because a worker had failed to fill the entire seam.)
The keel, which is cast from ceramic molds, is attached to a 12-deep stub using seven, 3/4 J-shaped stainless steel bolts. The 1,400-pound lead keel is coated with four coats of epoxy primer.
As on most J/Boats, the mast step is an aluminum I beam tabbed to the hull on both sides of its base. Transverse aluminum webs welded to each end are through-bolted at the aft end into the main bulkhead and forward to another bulkhead. The mast is attached with four bolts attached to a plate that allows fore and aft adjustment at the base.
The retractable bowsprit is located to starboard. When owners of early models experienced leaks into the forepeak, a rubber seal gasket was mounted on the front of the housing.
The fiberglass rudder is molded in two halves that are cored with balsa before being married and wrapped with fiberglass at leading and trailing edges.
The company delivered 49 boats within months of its introduction and, like newborns, experienced teething problems: Some of the original stanchion bases failed where spinnaker blocks were attached, so the factory welding method was improved. Some mast cranes with lightening holes failed. Stainless steel gudgeons on the rudder were initially under-engineered so have been increased in size from 1/8 to 3/16 material, as has the stainless tiller strap. Owners of early models were provided with retrofits.
We inspected hull #42, which has been raced extensively for two seasons but still appears factory fresh. Gelcoat surfaces are unblemished. There were no signs of crazing or stress cracks, and areas where the crew operates were clean. Though the owner has raced in 25- to 35-knot winds in San Francisco and Seattle, his only failure was at a stanchion base.
We have always thought that TPI does as good a job as anyone building with balsa. At the same time, it should be remembered that the current generation of lightweight performance boats, despite their stiff- ness, tend to be more fragile than older, more heavily laid-up cruisers.
Deck Layout
Because sprit boats fly asymmetrical spinnakers and are equipped with roller-furling headsails, the amount of clutter on deck and in the cockpit is greatly reduced. Replacing the spinnaker pole eliminates a need for deck chocks, foreguy and topping lift, afterguy, sheet stoppers and, perhaps, one winch.
Generally, four lines are led aft on the J/80: jib sheets and spinnaker sheets, which are led to Harken 32-2A winches in the cockpit. Two identical winches located on the coachroof are factory options, but may be redundant. One owner told us he uses them only when setting the spinnaker or doing a jibe set, and is considering removing them.
Main and jib halyards are cleated at the mast. The spinnaker halyard is led to a cam cleat on the coachroof, the spinnaker tack line to a cam cleat on the side of the cabin, as is the roller-furler line, and the pole launch line is inside the bulkhead with only the tail exposed. An outhaul and reef line located in the boom exit near a clam cleat on the underside of the boom, within reach of a crewperson. Cunningham and vang controls are also at the base of the mast, within reach of the cockpit or rail.
Mainsheet trim and backstay adjustment is easily accomplished by the helmsman from a position aft of the traveler. The mainsheet system includes a 2:1 Harken traveler system led to cam cleats in the coam- ing, and five-part Harken mainsheet system led to a swivel base cleat. The 4:1 split backstay tackle is led forward to a position at the helmsmans fingertips.
When sailing downwind in moderate breezes, trimmers are typically located opposite the primary winches, two body widths forward of the helmsman. To keep the boat level when going to weather in more than 15 knots of wind, the jib sheet is led to the weather winch.
As one experienced crewperson told us, This boat is so easy to sail that if you have an experienced helmsman, you can pick up three novices and go racing.
Hall Spars supplies the fractionally rigged, double spreader rig, which measures 31 above the deck. The mast is supported by a rod headstay and stainless steel 1×19 shrouds and backstay.
Space belowdecks is well organized and nicely finished, but there isn’t much of it. This is because of the boats narrow, 8 3 beam and long cockpit. Daylight enters the area through two Lexan ports, but the space will be dark at night unless one purchases the optional Halogen reading lights.
The main cabin has 4 of headroom, and is accented by a teak and holly sole. Single berths located amidships are more than 6 long, but only 19 wide. Big persons wont find them very comfortable. Tiny storage compartments are located beneath each settee.
The forepeak is more spacious, 5 6 wide at the main bulkhead, and almost 7 long. Theres storage in the forepeak for little more than the battery and some small items, because the hollow area below the berth is enclosed to provide flotation. A small anchor locker is located in the bow.
Space aft of the companionway below the cockpit is open for storage, and is accessible by removing the companionway steps, which are mounted on a stainless steel frame attached to the hull with quick release pins. The space is adequate for storage of a cooler, portable toilet, outboard, and fuel tank. Wed recommend installation of a sliding tray or bracket to simplify the process and make access easier.
A bulkhead 6 from the stern encloses the aft section of the boat, adding additional flotation. Though the area can be inspected through removable plastic plates located belowdecks and in the cockpit, repairs to the area will present a challenge.
Exposed wiring from running lights is secured by cable ties screwed to tabbing in the hull. They detract from the boats appearance and could pose a hazard if pulled loose.?Though there is room for storage of equipment necessary for weekending, the challenge will be in the organization of gear and supplies.
Auxiliary power is furnished most often by a 3-hp. outboard motor on a transom bracket. There is no special locker for the portable fuel tank, so it sits in the cockpit. To minimize weight, capacity usually is limited to about 2 gallons.
Performance
We sailed Steve Painters Climax in moderate winds and flat water on Puget Sound and found her to be responsive from the moment we left the dock. In close quarters amidst a fleet of returning boats, we unfurled the jib and, once clear of traffic, the main was hoisted. The boats response was to lower its right shoulder and shoot forward into the wind.
We estimated wind speed at 10-12 knots (the design class does not allow wind instruments), a range Painter said is trickiest when sailing in competitive situations.
She likes it when the wind is under ten, because she performs well in light air, and when its over fifteen, because then she will plane when sailing downwind. In ten to fifteen knots we find it difficult to sail to her handicap, he told us.
A veteran sailor who has owned and campaigned a Star boat, Catalina 30, and most recently a C & C 44, Painter says hes having more fun with the J/80 than with any of the others.
When equipped with a non-overlapping jib, the boat rates 127 PHRF on the Sound, but regional handicaps differ by as much as 12-15 seconds. More than 170 boats have been produced and one-design fleets are organizing across the country, though most quickly on the East Coast.
When we took the helm we found that the designers claims of a neutral helm and positive tracking were not exaggerations. A Forespar tiller extension allows the helmsman to position himself comfortably with a single lifeline for back support and a 3 footrest built into the sole for lateral support.?Tacking is as simple as stepping across the boat, because the mainsheet is well forward of the tiller. Crew movement is rather straightforward as well. The boom is high enough that the risk of head-knocking has been reduced, and the coachroof far enough forward that its not necessary to crawl across it on a tack.
Having tested other sprit boats, weve become accustomed to launching the asymmetrical spinnaker, and have an increased appreciation for them as they allow cruisers and racers to sail fast without dealing with the potential for disaster that always exists with a conventional spinnaker setup.
The spinnaker, which is always tacked to the bow-sprit, is launched by pulling the pole forward and hoisting it from a J/24-style canvas basket in the companionway. With one person sweating the halyard and a second taking the sheet, it is aloft and pulling within 30 seconds.
Like any boat with an asymmetrical spinnaker, the J/80s best point of sail downwind is broad reaching. When the wind pipes up, the crew moves aft, the bow comes out of the water and shes planing. Compared to conventionally rigged boats, which sail fast with the pole on the headstay, sailing high jibe angles downwind is inefficient.
Because theres no spinnaker pole, theres no need for a foredecker. Jibing is simply a matter of pulling the clew across the boat in front of the headstay and trimming to the new course.
Spinnaker takedowns are simpler as well, especially when the sail is doused to weather. We unfurled the jib, jibed and eased the spinnaker halyard as the sail fell to the deck with assistance from one crewman controlling the clew.
J/80 vs. Melges 24
Initial reaction to the introduction of sprit boats was a combination of skepticism and curiosity. Judging from the success of J/Boats as well as new boats introduced by competitors, market acceptance is now a given in both racing and cruising fleets.
However, there are clear distinctions among boats on the market, which requires that a buyer clarify his needs before writing a check. Comparing the J/80 with the Melges 24 may provide a frame of reference because of their similarities and differences. The Melges is clearly a faster boat, rating in the 90s, despite being nearly 2 shorter.
Both have cavernous cockpits designed and rigged to maximize performance. Though waterline length, draft, and beam measurements are close, there are major differences. The Melges has a retractable keel and performs like an overgrown dinghy; the J/80 has a fixed keel. It is less buoyant and more comfortable going to weather in a chop.
The Melges is a lightweight at just 1,700 lbs., com- pared to the J/80s 2,900 lbs. The Melges carbon fiber rig and spreaders, which weigh only 62 lbs., plus the difference in overall displacement, translates into speed, especially downwind, when it breaks free of the surface and begins planing in 10 knots of wind. The J/80 simply needs more wind to overcome its displacement and the 185-pound rig. However, in 15 knots of wind, J/80 speeds reach into the teens, and weve seen them crack the 20-knot barrier on gusty San Francisco days. At those speeds, sailing is thrilling and challenging, regardless of the boat.
An equally important consideration is the proficiency of the crew. We agree with those who contend that the Melges requires a talented crew to be sailed to the victory circle. The 40- to 50-boat fleets that successfully contend at Key West Race Week are littered with professional sailors. By comparison, the J/80 provides veteran sailors, like Painter, an opportunity to compete at a high level without recruiting so-called rock stars.
Both boats are trailerable, though we would not want to set up the J/80 every weekend. Stepping the mast requires a gin pole, at the least, and hands and muscles, or, preferably, a hoist. By comparison, the Melges can be launched from a trailer and easily rigged in 30 minutes. The fixed keel on the J/80 also means a higher profile when traveling, though Johnstone told us that J/80 sailors trailer their boats from coast to coast to attend regattas.
The J/80 is slightly less expensive. At $33,200, it is priced $2,250 less than the Melges. Sails will add $4,500 to the cost, approximately $500 less than the Melges.
In our view, the issue is not one of performance be- cause both boats are quick, and perform well in light and heavy winds. Both have excellent designs, are well constructed, and have strong factory support programs.
The Melges is faster and may have more sex appeal. When measuring overall utility-including family sailing-the J/80 gets the nod. We wouldnt be afraid to take the boat into the ocean, but wed think twice about a coastal passage in the Melges.
RELATED ARTICLES MORE FROM AUTHOR
Hello, I am upgrading from a J30 to a J80 and very new to this set up on the J80. I was wondering if I could have the email to Darrell Nichollson just to ask some questions as I come across them? My first question is there are no docking cleats for dock lines or for fastening an anchor. I notice the present owner uses docklines with a hook tied to the end and the hook connected to the plate mounted on the fordeck and to the stern stantions. Is that correct set up when leaving the boat in the water at a dock? Also, the anchor is stored inside the cabin in the forepeak? To get the anchor for use, one must go below to the bow and grab in with the anchor line? Thanks, Jon
LEAVE A REPLY Cancel reply
Log in to leave a comment
Latest Videos
What’s the Best Sailboats for Beginners?
Why Does A Sailboat Keel Fall Off?
The Perfect Family Sailboat! Hunter 27-2 – Boat Review
Pettit EZ-Poxy – How to Paint a Boat
Latest sailboat review.
- Privacy Policy
- Do Not Sell My Personal Information
- Online Account Activation
- Privacy Manager
The J80 is a 26.25ft fractional sloop designed by Rod Johnstone and built in fiberglass by J Boats since 1992.
The J80 is a light sailboat which is a very high performer. It is very stable / stiff and has a low righting capability if capsized. It is best suited as a racing boat.
J80 for sale elsewhere on the web:
Main features
Model | J80 | ||
Length | 26.25 ft | ||
Beam | 8.25 ft | ||
Draft | 4.90 ft | ||
Country | United states (North America) | ||
Estimated price | $ 0 | ?? |
Login or register to personnalize this screen.
You will be able to pin external links of your choice.
See how Sailboatlab works in video
Sail area / displ. | 26.66 | ||
Ballast / displ. | 48.28 % | ||
Displ. / length | 121.59 | ||
Comfort ratio | 11.58 | ||
Capsize | 2.32 |
Hull type | Monohull fin keel with transom hung rudder | ||
Construction | Fiberglass | ||
Waterline length | 22 ft | ||
Maximum draft | 4.90 ft | ||
Displacement | 2900 lbs | ||
Ballast | 1400 lbs | ||
Hull speed | 6.29 knots |
We help you build your own hydraulic steering system - Lecomble & Schmitt
Rigging | Fractional Sloop | ||
Sail area (100%) | 338 sq.ft | ||
Air draft | 0 ft | ?? | |
Sail area fore | 149.63 sq.ft | ||
Sail area main | 187.50 sq.ft | ||
I | 31.50 ft | ||
J | 9.50 ft | ||
P | 30 ft | ||
E | 12.50 ft |
Nb engines | 1 | ||
Total power | 0 HP | ||
Fuel capacity | 0 gals |
Accommodations
Water capacity | 0 gals | ||
Headroom | 0 ft | ||
Nb of cabins | 0 | ||
Nb of berths | 0 | ||
Nb heads | 0 |
Builder data
Builder | J Boats | ||
Designer | Rod Johnstone | ||
First built | 1992 | ||
Last built | 0 | ?? | |
Number built | 0 | ?? |
Other photos
Modal title.
The content of your modal.
Personalize your sailboat data sheet
- facebook-alt
J/80 Best Practices
International class website
J/80 Brochure by J/composites EU
J/80 Owner’s manual
Spars and Spare parts by Rig-Rite
Technical specifications
LOA | 26.30 | 8.00 |
LWL | 22.00 | 6.71 |
Beam | 8.30 | 2.51 |
Standard Draft | 4.90 | 1.49 |
Standard Ballast | 1,400 | 635 |
Displacement | 2,900 | 1,315 |
Engine | outboard | outboard |
100% SA | 338 | 31.40 |
I | 31.50 | 9.60 |
ISP | 33.00 | 10.06 |
J | 9.50 | 2.90 |
P | 30.00 | 9.14 |
E | 12.50 | 3.81 |
SA/Dspl | 27 | 27 |
Dspl/L | 122 | 122 |
Hull & Deck Construction
- Composite hull and deck of GRP balsa sandwich with E-glass fabrics, additional reinforcing in way of highly loaded hardware.
- Vinylester and ISO NPG gelcoat in hull for osmotic gelcoat blister protection.
- Molded GRP main bulkhead to absorb the direct loads of the shrouds and mast compression.
- Mast step loads are distributed to aluminum frame fastened to the main bulkhead.
- Hull is reinforced in way of keel with several transverse molded stringers.
Deck Hardware
- Large modern cockpit with molded foot braces on centerline.
- Non slip finish to all horizontal deck surfaces in white.
- Molded Toe-rail forward.
- Bolts, screws and fitting are all made of stainless steel, marine grade anodized.
- Stainless steel forestay attachment plate.
- Stainless steel pulpit single lifeline.
- “U” bolt on the foredeck.
- Stainless steel chain plates for cap shrouds, lower, shrouds and backstay.
- Opening hatch (420 x 420 mm) mounted on cabin trunk forward of mast.
- Two black anodized jib T tracks with cars.
- Boom vang system (12:1) with swivel mounted cleats, on both sides of the coach roof.
- Mainsheet traveler with coaming mounted (2:1) control line, cleats.
- Mainsheet system (5:1) with swivel cam cleat and ratchet block on cockpit sole.
- Cleats and blocks for backstay adjustment (4:1) led forward in cockpit to port and starboard.
- Two 30:1 primary winches with cam cleats.
- Internal bowsprit launching line led aft through fairleads to cabin trunk cam cleat.
- Bullseye fairleads for furler control line (port with cam cleat) and tack line (starboard) to cabin side mounted clutch.
- Two halyard storage bags shipped loose.
- Spinnaker sheet blocks outboard of winches and aft.
- Two stern pulpits.
- Single continuous lifeline.
- One fixed cabin window on each side of cabin side.
- GRP main sliding hatch with acrylic one piece offshore drop board.
- Winch handle.
- Bow and stern running lights.
Keel & Rudder
- Low VCG keel cast from lead and antimony, faired and finished with an epoxy primer and secured by way of stainless steel bolts to the integral molded hull sump.
- Reinforced FRP rudder on transom with stainless steel fittings.
- Laminated varnished wood tiller, with adjustable tiller extension.
Spars & Rigging
- Mast and boom in anodized aluminum.
- Headsail roller furling on headstay.
- Two pairs of swept spreaders.
- Stainless steel wire standing rigging with turnbuckle adjusters.
- Backstay with adjustment tackle led to both sides of the cockpit.
- Complete running rigging package.
Outboard Motor
- Optional owner supplied, minimum 3.5hp long shaft recommended.
- Low transom suitable for direct mounting of a 3 or 4 hp outboard.
- Removable cabin sole.
- Molded settee berths with access to storage below.
- Large forward V-berth platform with two access panels above mast step.
- Large removable molded step with space for an outboard and cooler to be stored aft.
- Crane lifting bar integral to keel bolt system.
- Interior reading light.
- Electrical panel.
- Battery box with straps (battery owner supplied).
Share this:
- Click to share on Twitter (Opens in new window)
- Click to share on Facebook (Opens in new window)
- Click to share on Pinterest (Opens in new window)
- Click to share on WhatsApp (Opens in new window)
Designed using Veloce . Powered by WordPress .
[{{{type}}}] {{{reason}}}
{{texts.summary}} {{#options.result.rssIcon}} RSS {{/options.result.rssIcon}}
{{{_source.title}}} {{#_source.showPrice}} {{{_source.displayPrice}}} {{/_source.showPrice}}
{{{_source.displayUrl}}}
{{{_source.displayDate}}}
{{{_source.description}}}
{{#_source.additionalFields}} {{#title}} {{{label}}}: {{{title}}} {{/title}} {{/_source.additionalFields}}
- J/70 (22.8')
- J/80 (26.3')
- J/88 (29.2')
- J/9 (28.0')
- J/99 (32.6')
- J/111 (36.5')
- J/112E (36.0')
- NEW J/40 (40.9')
- J/121 (40.0')
- J/45 (45.6')
- Other J/Models
- J/Newsletter
- Sailing Calendar
- J/Classes & Owners
- J/Gear Store
- J/Owner Resources
- J/World Annapolis
- J/World San Diego
- Request New Boat Info
- Find My Dealer
- Contact J/Boats
- Contact J/Composites
- Licensed Builders
By Product Categories
Small Boat Blocks
Big Boat Blocks
Complementary Hardware
Travelers & Genoa Leads
Mainsail Handling
Headsail Handling
Mooring Solutions
Spare Parts
Accessories
Harken Canvas
Sportfishing
Fly Soft-Attach Blocks
Carbo Air Blocks
Small Boat Classic
Flip-Flop Small Boat
GP Catamaran Ceramic Mainsheet Systems
Protexit™ Exit Blocks
Through-Deck
Wire High-Strength
Dinghy Vang
Small Boat Deck Organizers
Midrange Classic
Midrange Deck Organizers
Zircon Blocks
Element Blocks
Black Magic Air Blocks
Cruising ESP Blocks
Megayacht Blocks
Stainless Steel Blocks
Black Magic Air Runners
FlatWinder Powered Blocks
Mastbase Blocks
Over-the-Top
Crossover Blocks
Big Boat Deck Organizers
Cam Cleats & Kits
Cam Cleat Accessories
Cam Cleat Bases
Stand-Up Bases
Deck Organizers
Spinnaker Pole Cars
Soft Attachments
Fixed Padeyes
Removable Padeyes
Bolt-Down Fairleads
Grand Prix Jib Leads
Halyard Tensioners
Tiller Extensions
Peter's Desk Drawer
Dinghy Jib Leads
Crossbow Pivoting Self-Tacking Jib Traveler
13 mm Micro
22 mm Small Boat
27 mm Midrange
32 mm Big Boat
Windward Sheeting
42 mm Mini-Maxi
T-Track Genoa Lead
Access Rail System
13 mm AA Battcar System
22 mm A Battcar System
27 mm B Battcar System
32 mm C Battcar System
18 mm Switch Battcar System
26 mm Switch Battcar System
26 mm Trysail Switch
32 mm Switch Battcar System
32 mm Trysail Switch
40 mm Switch Battcar System
40 mm Trysail Switch System
Furling Mainsail Outhaul Systems
Single Line Reefing
Harken Vang-Master
Carbo Racing Foil
Small Boat Furling
Small Boat Underdeck
Reflex Furling
MKIV Jib Reefing & Furling
MKIV Underdeck Jib Reefing & Furling
Furling Accessories
Powered Furling
MKIV Ocean Furling
SnubbAir (Not a Winch)
Grand Prix Winches
Air Winches
Circuit Breakers
Analog Switches
Digital System Switch
Aluminum, Chrome & Bronze Winch Handles
Carbo OneTouch Locking Winch Handle
Service Kits
CLR Mooring Winches
Electric Captive Reel Winches
Hydraulic Captive Reel Winches
UniPower Radial
Single-Acting Integral Backstay Adjuster
Single-Acting Cylinders
Locking Cylinders
Double-Pull Cylinders
Grand Prix Cylinders
Hydraulic Cylinder Rod End Blocks
Hydraulic Cylinder End Fittings
Control Valves
Control Manifolds
Control Panels
Compact Control Panel
Rotary Pumps
Hydraulic Pump Handles
Power Systems
Repair Kits
Ball Bearings
Block Spare Parts
Traveler Cars
Furling Spare Parts
Winch Spare Parts
Winch Service Kits
Blockheads Gear
Promo & Gifts
Marine Grip
Blue Performance
Jeep/Truck tops
Garage storage
One-design Covers
Boat accessories
Canvas bags
By Type of Sailing
Dinghy / One-Design
Offshore Racing
Coastal / Day Cruising
Bluewater Cruising
Megayachts / Custom
Service Guide
Tech/Service
deck layouts
Data Sheets (SDS)
How to choose
System diagrams
Calculators
Reeving diagrams
Traveler Purchase Selection Guide
How to Choose
Testimonials
Hoister Videos
Request a Quote
Request Samples
Fabric details
Cover Styles
Canvas Videos
Contract Services
Materials and Components
Our Equipment
Contract Cut-and-Sew Project Spotlight
- Harken at the front
- Safety & Rescue
Support / One-design deck layouts
J/80 Deck Layout
With two Carbo fiddles and a pendant (yellow) to reduce the mainsheet's length, the 5:1 system is a combination of low weight and high power. The adjustable 75 mm Carbo Ratchamatic's® ratchet instantly engages to carry higher loads, but disengages quickly during mark rounding, jibes and light-air situations. A swivel base allows cleating from any direction.
Mainsheet Traveler
The mainsheet traveler system uses Harken's award-winning CB traveler car. Captive ball bearings are extremely low-friction and enable effortless car cleaning and installation. The double-ended control line has a 2:1 purchase, making the system simple and very fast.
A double-ended 4:1 purchase makes this split backstay adjustable. As the ring is pulled down, two high-strength wire blocks tighten the backstay by pinching the legs of the bridle together. The system is quick and powerful, and the fixed wires keep the mast tensioned even if the 4:1 is released.
If you would like to link to or reprint this article please contact [email protected]
Class History
Designed by J/Boats' Rod Johnstone, the International J/80 is a perfect choice for offshore family racing, as well as for cruising and dinghy sailors transitioning to keelboat competition. The powerful asymmetrical spinnaker is easy to set and allows this sprit one-design to plane at 15 knots with crew trimming safely from the cockpit. The fixed keel and bulb keeps the boat on its feet and user friendly, particularly going upwind in a chop. A high boom and closed transom are additional safety factors. The J/80 is trailerable and complies with US and European towing widths. Active fleets can be found in the US, France, UK and Sweden.
Links J/80 Class McLube™
Boat Specifications
LOA: 26.25 ft (8 m) LWL: 24.60 ft (7.5 m) Beam: 8.25 ft (2.5 m) Draft: 4.90 ft (1.5 m) Sail Area: 338 sq ft (31.4 sq m) DSPL: 31,000 lb (14058.5 kg) Lead Keel: 1,400 lb (635 kg) Spinnaker: 700 sq ft(65 sq m)
Related products
29mm Cheek Block
29mm Double Block — Swivel
29mm Stand-up Block
40mm Block — Swivel
57mm Fiddle Block — Swivel
57mm Fiddle Block — Swivel, Becket
75mm Ratchamatic® Block — Swivel
29mm Upright Lead Bullet Block
Micro Carbo-Cam® Kit — Wedge, Wire Fairlead
22mm Car — Stand-Up Toggle
22mm Heavy-Duty Endstops — High-Beam, Set of 2
22mm High-Beam Slide Bolt Track — 1.5 m
Standard Cam Base — Swivel
25mm Wire Block — Shackle
Product categories.
- United States
- New Zealand
- United Kingdom
Harken US Offices will be closed Monday, September 2 . Any orders placed after 12 p.m. Friday, August 30 will be processed upon re-opening on Tuesday, September 3.
[{{{type}}}] {{{reason}}}
{{texts.summary}} {{#options.result.rssIcon}} RSS {{/options.result.rssIcon}}
{{{_source.title}}} {{#_source.showPrice}} {{{_source.displayPrice}}} {{/_source.showPrice}}
{{{_source.displayUrl}}}
{{{_source.displayDate}}}
{{{_source.description}}}
{{#_source.additionalFields}} {{#title}} {{{label}}}: {{{title}}} {{/title}} {{/_source.additionalFields}}
- J/70 (22.8')
- J/80 (26.3')
- J/88 (29.2')
- J/9 (28.0')
- J/99 (32.6')
- J/111 (36.5')
- J/112E (36.0')
- NEW J/40 (40.9')
- J/121 (40.0')
- J/45 (45.6')
- Other J/Models
- J/Newsletter
- Sailing Calendar
- J/Classes & Owners
- J/Gear Store
- J/Owner Resources
- J/World Annapolis
- J/World San Diego
- Request New Boat Info
- Find My Dealer
- Contact J/Boats
- Contact J/Composites
- Licensed Builders
Proudly serving the boating community since 1972
- The RCR Advantage
- All Boats for Sale
- Search New Inventory
- Search Used Boats
- Recently Sold
- BENETEAU Oceanis 30.1
- BENETEAU Oceanis 34.1
- BENETEAU Oceanis 37.1
- BENETEAU Oceanis 40.1
- BENETEAU Oceanis 46.1
- BENETEAU Oceanis 51.1
- BENETEAU Oceanis Yacht 54
- BENETEAU Oceanis Yacht 60
- BENETEAU First 14
- BENETEAU First 18
- BENETEAU First 24
- BENETEAU First 27
- BENETEAU First 36
- BENETEAU First 44
- BENETEAU FIRST Yacht
- FIGARO BENETEAU 3
- BENETEAU Antares 7
- BENETEAU Antares 8 Cruising
- BENETEAU Antares 8 Fishing
- BENETEAU Antares 9
- BENETEAU Antares 11
- BENETEAU Antares 12
- BENETEAU Flyer 7 SPACEdeck
- BENETEAU Flyer 7 SUNdeck
- BENETEAU Flyer 8 SPACEdeck
- BENETEAU Flyer 8 SUNdeck
- BENETEAU Flyer 9 SPACEdeck
- BENETEAU Flyer 9 SUNdeck
- BENETEAU Flyer 10
- Back Cove 34O
- Back Cove 372
- Back Cove 39O
- Back Cove 41
- RCR Yachts Buffalo Marina
- Market Evaluation
If you would like to expand your sailing horizons with a modern sportboat in open waters outside protected harbors and lakes, there’s only one choice: the International J/80 one-design class sailboat. Sailing World magazine rated J/80 as easier to handle, less intimidating, safer and better suited for sailing offshore than other modern sportboats tested.
J80 key west 2005 02 Numbers highlight the reason: The 1,440 lb. lead keel with bulb on the J/80 weighs nearly the same as the leading competitor’s entire boat. No question, stability is the most important standard when it comes to a forgiving design, family sailing fun and sailing in open waters. No wonder the J/80 continues to be the fastest growing one-design sportboat class in Europe, it’s a joy to sail in winds from 5 to 25+ knots!
Additional Information
Sailing can be the world’s best family sport. The key is a boat that holds the attention and interest of many types of sailors, young and old! J/80 does it all, with thrilling 15 knot rides under spinnaker or relaxed sunset cruises with mainsail only. SAILING WORLD rated J/80 as easier to handle, less intimidating, safer and better suited for sailing offshore than other modern sport boats tested.
Thanks to its 1400lb. Fixed lead keel (48% ballast ratio) J/80 has big-boat feel and requires less experienced crew. The boom is high for safety and good visibility. No one has to clamber over a cabin top because everyone sits in the 12 ft. long cockpit. Even toddlers are contained by playpen-high cockpit sides.
Be sailing in 3 minutes. Take off the boom cover and hoist the mainsail, attached to the mast with slides. Cast off. You’re now sailing faster than other boats with full canvas.
Ready for more speed? Uncleat the furler line and pull in the jib sheet. Presto! Now you’re really flying! Time for the afterburners? Pull the sprit launch control line, hoist the asymmetric spinnaker and trim. Now you’re planing! To jibe, simply let off the old sheet and pull in the new. No one on the foredeck! You can even do it single-handed. And to think, prior to the J/80, this kind of performance was rarely achieved, even with a full crew of 4-5 athletic experts.
Join hundreds of others worldwide who are discovering how well J/80 fulfills their dream: A single boat which combines simplicity of operation, confidence building stability and sparkling performance in an affordable, low maintenance and trailerable package. Truly, a unique sailboat for the entire family!
LOA | 26.30 | 8.00 |
LWL | 22.00 | 6.71 |
Beam | 8.30 | 2.51 |
Standard Draft | 4.90 | 1.49 |
Standard Ballast | 1,400 | 635 |
Displacement | 2,900 | 1,315 |
Engine | outboard | outboard |
100% SA | 338 | 31.40 |
I | 31.50 | 9.60 |
ISP | 33.00 | 10.06 |
J | 9.50 | 2.90 |
P | 30.00 | 9.14 |
E | 12.50 | 3.81 |
SA/Dspl | 27 | 27 |
Dspl/L | 122 | 122 |
IMAGES
VIDEO
COMMENTS
J/80 Specifications (Sample Specification) Composite hull and deck of GRP balsa sandwich with E-glass fabrics, additional reinforcing in way of highly loaded hardware. Vinylester and ISO NPG gelcoat in hull for osmotic gelcoat blister protection. Molded GRP main bulkhead to absorb the direct loads of the shrouds and mast compression.
J/80. Save to Favorites . Beta Marine. BOTH. US IMPERIAL. METRIC. Sailboat Specifications Definitions Hull Type: Fin w/transom hung rudder: Rigging Type: Fractional Sloop: LOA: 26.25 ft / 8.00 m ... J/80 Class Website: Download Boat Record: Notes. Photo courtesy of Adam Hunt. Sailboat Forum.
International J/80 One-Design- THE world's largest 26 ft sailboat class worldwide- 1,600+ boats in 15+ nations- try one today! SEARCH J/BOATS ... (48% ballast ratio) J/80 has big-boat feel and requires less experienced crew. The boom is high for safety and good visibility. No one has to clamber over a cabin top because everyone sits in the 12 ...
J/80 flying its asymmetrical spinnaker. The J/80 is a racing keelboat, with the hull built predominantly of fiberglass.It has a fractional sloop rig with a retractable bowsprit controlled from the cockpit by a deployment line. The hull has a raked stem, a plumb transom, a transom-hung rudder controlled by a tiller and a fixed swept fin keel.It displaces 2,900 lb (1,315 kg) and carries 1,400 lb ...
Sailboat specifications. Last update: 13rd March 2020. The J/80 is a 26'2" (8m) one design sailboat designed by Rod Johnstone (United States). She is built since 1993 by J/Boats (United States).
Specifications are subject to change without prior notice or obligations . Title: Spécifications J80 Author: Koyot Blue Created Date: 7/31/2020 11:19:59 AM ...
Masthead tri-color navigation light. 1x19 wire standing rigging with turnbuckle adjusters. Backstay with adjustment tackle led to either side of the cockpit. Outhaul (6:1) led inside boom. Retractable, carbon bowsprit, controlled from cockpit. Boomvang line with blocks (12:1). One main halyard with shackle.
J/80 is a 26′ 2″ / 8 m monohull sailboat designed by Rod Johnstone and built by J Boats and Waterline Systems, LLC starting in 1992. ... J/80 is a 26 ′ 2 ″ / 8 m monohull ... Hull Monohull Keel Fin Rudder Transom hung Construction FG Dimensions. Length Overall 26 ...
J/80 Standard Building Specifications 1-Dec-20 Items in red are updated since August 16, 2018 Standard Fitting Description Permitted Modification and/or dimension reference ... 39 One cockpit operated manual bilge pump Optional equipment on USA built boats 40 Masthead tri-color navigation light; OR deck-mounted bow navigation light and transom or
J80. J/80 Specifications (Sample Specification) Composite hull and deck of GRP balsa sandwich with E-glass fabrics, additional reinforcing in way of highly loaded hardware. Vinylester and ISO NPG gelcoat in hull for osmotic gelcoat blister protection. Molded GRP main bulkhead to absorb the direct loads of the shrouds and mast compression.
Download the J80 Boat Specifications
J/80 Specifications. Five years after introduction of the J/105, the company has sold more than 400 sprit boats in sizes ranging from 26-50 feet, and several look-alikes have been introduced by competitors. ... The fixed keel on the J/80 also means a higher profile when traveling, though Johnstone told us that J/80 sailors trailer their boats ...
J/Boats j/80 Specifications. The J/Boats j/80 is produced by the brand J/Boats since 2012. J/Boats j/80 is a 8.00 meters sport keel monotype with a draft of 1.49 meters. The yacht with a CE certification class (B) and can navigate no further than 200 miles off the coastline. The base price of a new J/Boats j/80 is not currently published ...
The J80 is a 26.25ft fractional sloop designed by Rod Johnstone and built in fiberglass by J Boats since 1992. The J80 is a light sailboat which is a very high performer. It is very stable / stiff and has a low righting capability if capsized. It is best suited as a racing boat.
J/80 Class Rules Page 1 of 14 INTERNATIONAL J/80 CLASS RULES 2018 Published Date: 29/01/2018 ... drawings, specifications or measurement form the matter shall be referred to World Sailing. A.8 INTERPRETATION OF CLASS RULES - AT AN EVENT ... The boat shall comply with any special requirements of the MNA under which
Large removable molded step with space for an outboard and cooler to be stored aft. Crane lifting bar integral to keel bolt system. Interior reading light. Electrical panel. Battery box with straps (battery owner supplied). J/80 collection of specifications, data, links, tuning and trimming, and other files.
2013 J/80 Standard Building Specifications - Click Here; J/80 Class Rule Appendix H.6 Boat Weight Measurement Form - j80_weight_measurement.pdf: File Size: 74 kb: File Type: pdf: Download File. J/80 Safety Gear Compliance Form - 2014_j80_north_american_saftey_final_version.pdf:
International J/80 One-Design- THE world's largest 26 ft sailboat class worldwide- 1,600+ boats in 15+ nations- try one today!
Class History Designed by J/Boats' Rod Johnstone, the International J/80 is a perfect choice for offshore family racing, as well as for cruising and dinghy sailors transitioning to keelboat competition. The powerful asymmetrical spinnaker is easy to set and allows this sprit one-design to plane at 15 knots with crew trimming safely from the cockpit. The fixed keel and bulb keeps the boat on ...
J/80 Technical specifications & dimensions- including layouts, sailplan and hull profile.
Boats. J/70 (22.8') J/80 (26.3') J/88 (29.2') J/9 (28.0') J/99 (32.6') J/111 (36.5') J/112E (36.0') NEW J/40 (40.9') J/121 (40.0') J/45 (45.6') Other J/Models; News. J/Newsletter; ... J/80 Brochure. If the brochure does not immediately load, please refresh the page. J/Sailing Models Current Models Classic J/Models Sailing Calendar. About J/Boats
Fixed lead keel (48% ballast ratio) J/80 has big-boat feel and requires less experienced crew. The boom is high for safety and good visibility. No one has to clamber over a cabin top because everyone sits in the 12 ft. long cockpit. Even toddlers are contained by playpen-high cockpit sides. Be sailing in 3 minutes.
3. KEEL FAIRING : the J/80 one-design class rules specifically restrict the shape and dimensions of the keel and keel sump and set minimum thickness offsets that all boats must exceed. Because the J/80 has a molded sump, extreme care must be taken that fiberglass material is not removed from the exterior of the sump in an effort to minimize